Ruger LCR now in 9mm
Moderator: carlson1
-
Topic author - Senior Member
- Posts in topic: 1
- Posts: 2410
- Joined: Thu Dec 23, 2004 10:57 pm
- Location: Denton County
- Contact:
Ruger LCR now in 9mm
Ruger expanding LRC product line, again. New 9mm 5-holer. About 4 ounces heavier than 38+P version. And evidently weighs just a bit more than .357 version. Moon clips optional ?http://www.ruger.com/news/2014-09-22.html
CHL Instructor since 1995
http://www.dentoncountysports.com "A Private Palace for Pistol Proficiency"
http://www.dentoncountysports.com "A Private Palace for Pistol Proficiency"
-
- Senior Member
- Posts in topic: 1
- Posts: 1036
- Joined: Sat Aug 26, 2006 7:57 pm
- Location: Waxahachie, TX
Re: Ruger LCR now in 9mm
I am seriously thinking about picking up one of these bad boys.Greybeard wrote:Ruger expanding LRC product line, again. New 9mm 5-holer. About 4 ounces heavier than 38+P version. And evidently weighs just a bit more than .357 version. Moon clips optional ?http://www.ruger.com/news/2014-09-22.html
Joe
-
- Senior Member
- Posts in topic: 2
- Posts: 799
- Joined: Mon Nov 12, 2012 5:52 am
- Location: San Antonio
Re: Ruger LCR now in 9mm
Highly intrigued. I mean I already have an LCR in .22 Mag but a 9mm version is seriously hard to pass up even though I've got a small 9mm semi-auto that already fills the gap. Academy will be seeing a lot more of me until I can get my hands on one.
EDC: Sig Sauer P320SC / P238
-
- Senior Member
- Posts in topic: 5
- Posts: 9043
- Joined: Tue Jun 21, 2011 4:07 pm
- Location: Boerne, TX (Kendall County)
Re: Ruger LCR now in 9mm
I do not understand the appeal of a 9mm revolver. Can one of you give me some insight?
Note: Me sharing a link and information published by others does not constitute my endorsement, agreement, disagreement, my opinion or publishing by me. If you do not like what is contained at a link I share, take it up with the author or publisher of the content.
-
- Senior Member
- Posts in topic: 1
- Posts: 2362
- Joined: Mon Mar 12, 2012 2:18 am
- Location: Houston
- Contact:
Re: Ruger LCR now in 9mm
I tend to agree with you, but I'd say the company has done its homework on this one - they're not going to invest the money on the tooling if they think it is a failed proposition.mojo84 wrote:I do not understand the appeal of a 9mm revolver. Can one of you give me some insight?
From the article referenced in the OP:
"Since its introduction in 2009, the LCR has become extremely popular with conceal carry customers seeking the simplicity of a revolver," said Chris Killoy, Ruger President and Chief Operating Officer. "Customers have been asking for a 9mm version due to ammo availability and compatibility with pistols. We were listening and have added a 9mm version of the LCR," he concluded.
Your best option for personal security is a lifelong commitment to avoidance, deterrence, and de-escalation.
When those fail, aim for center mass.
www.HoustonLTC.com Texas LTC Instructor | www.Texas3006.com Moderator | Tennessee Squire | Armored Cavalry
When those fail, aim for center mass.
www.HoustonLTC.com Texas LTC Instructor | www.Texas3006.com Moderator | Tennessee Squire | Armored Cavalry
-
- Senior Member
- Posts in topic: 1
- Posts: 470
- Joined: Tue Jul 23, 2013 7:00 am
Re: Ruger LCR now in 9mm
5 rds of 9mm? and then transition to a glock?
kidding aside i could see this being a good backup gun on your ankle for sure
kidding aside i could see this being a good backup gun on your ankle for sure
"Our houses are protected by the Good Lord and a gun, you might em both if you show up here not welcome son" Josh Thompson- Way out here (best song ever) "eventually all citizens will become criminals with enough legislation....."
-
- Member
- Posts in topic: 1
- Posts: 60
- Joined: Thu Mar 13, 2014 6:52 am
- Location: Fort Worth, TX
Re: Ruger LCR now in 9mm
I've always thought that 9MM (or any rimless cartridge) revolvers were odd and interesting. On one hand, it might be a hassle to have to use moon clips, but on the other hand, they also help with reloading. .38 Special isn't too hard to find in my area, but there's always a greater selection of 9MM pretty much anywhere. Plus, it's likely that most people already own something in 9MM, so you wouldn't have to start buying a different caliber just to feed one gun. As we all know, the truth will be in the sales numbers.
5/21/14 - Submitted online app.
5/24/14 - Class
5/27/14 - Submitted CHL-100 & checklist
7/18/14 - Plastic in hand
5/24/14 - Class
5/27/14 - Submitted CHL-100 & checklist
7/18/14 - Plastic in hand
-
- Senior Member
- Posts in topic: 5
- Posts: 9043
- Joined: Tue Jun 21, 2011 4:07 pm
- Location: Boerne, TX (Kendall County)
Re: Ruger LCR now in 9mm
Vol Texan wrote:I tend to agree with you, but I'd say the company has done its homework on this one - they're not going to invest the money on the tooling if they think it is a failed proposition.mojo84 wrote:I do not understand the appeal of a 9mm revolver. Can one of you give me some insight?
From the article referenced in the OP:
"Since its introduction in 2009, the LCR has become extremely popular with conceal carry customers seeking the simplicity of a revolver," said Chris Killoy, Ruger President and Chief Operating Officer. "Customers have been asking for a 9mm version due to ammo availability and compatibility with pistols. We were listening and have added a 9mm version of the LCR," he concluded.
My question was 100% just that, a question. I have no opinion regarding their decision to make one or why people want one. Nor was I questioning their decision.
I'm just curious what the advantage or appeal of a 9mm revolver is.
Note: Me sharing a link and information published by others does not constitute my endorsement, agreement, disagreement, my opinion or publishing by me. If you do not like what is contained at a link I share, take it up with the author or publisher of the content.
-
- Senior Member
- Posts in topic: 1
- Posts: 576
- Joined: Wed Aug 07, 2013 11:55 pm
- Location: Central Texas
Re: Ruger LCR now in 9mm
I think one benefit contributing to the appeal of a 9mm revolver is that it makes one heck of a backup gun. If you carry a 9mm semiauto and run into trouble then you have a backup that eats the same ammo. I was shown once by an old timer how easy it is to load a revolver from a mag. Pretty quick and slick. Of course that would depend on whether it requires moon clips or not.
-
- Senior Member
- Posts in topic: 5
- Posts: 9043
- Joined: Tue Jun 21, 2011 4:07 pm
- Location: Boerne, TX (Kendall County)
Re: Ruger LCR now in 9mm
It requires moon clips.Texsquatch wrote: Of course that would depend on whether it requires moon clips or not.
Note: Me sharing a link and information published by others does not constitute my endorsement, agreement, disagreement, my opinion or publishing by me. If you do not like what is contained at a link I share, take it up with the author or publisher of the content.
-
- Senior Member
- Posts in topic: 2
- Posts: 799
- Joined: Mon Nov 12, 2012 5:52 am
- Location: San Antonio
Re: Ruger LCR now in 9mm
No, they're optional. Moon clips just allow for use of the ejector.mojo84 wrote:It requires moon clips.Texsquatch wrote: Of course that would depend on whether it requires moon clips or not.
EDC: Sig Sauer P320SC / P238
-
- Senior Member
- Posts in topic: 5
- Posts: 9043
- Joined: Tue Jun 21, 2011 4:07 pm
- Location: Boerne, TX (Kendall County)
Re: Ruger LCR now in 9mm
Interesting. What holds the shell in the cylinder if the moon clip is removed? I actually believe the moon clips are required and the moon clip is designed so that the shells can be ejected without having to use a moon clip tool.CoffeeNut wrote:No, they're optional. Moon clips just allow for use of the ejector.mojo84 wrote:It requires moon clips.Texsquatch wrote: Of course that would depend on whether it requires moon clips or not.
From the Ruger website.
Then again, I may be misinterpreting what I am reading.9mm Luger Model
The LCR® in 9mm Luger model has an optimized charge hole design for positive ejection over a wide range of ammunition. The easy to load full moon clips act as a speed loader for quick reloads and its design allows for loading and unloading without the use of a moon clip tool.
Last edited by mojo84 on Fri Sep 26, 2014 2:48 pm, edited 2 times in total.
Note: Me sharing a link and information published by others does not constitute my endorsement, agreement, disagreement, my opinion or publishing by me. If you do not like what is contained at a link I share, take it up with the author or publisher of the content.
Re: Ruger LCR now in 9mm
For about the same amount of money you can have a 9mm semiauto about the same size that holds more than 5 rounds :).
I have never seen the need for a revolver that shoots semiautomatic pistol cartridges. Just buy a compact/subcompact semiautomatic pistol.
Just my .02,
LeonCarr
I have never seen the need for a revolver that shoots semiautomatic pistol cartridges. Just buy a compact/subcompact semiautomatic pistol.
Just my .02,
LeonCarr
"Whitetail Deer are extinct because of rifles with telescopes mounted on them." - My 11th Grade English Teacher
-
- Senior Member
- Posts in topic: 5
- Posts: 9043
- Joined: Tue Jun 21, 2011 4:07 pm
- Location: Boerne, TX (Kendall County)
Re: Ruger LCR now in 9mm
Apparently, I am wrong. According to Jeff, http://www.gunblast.com/Ruger-LCR9mm.htm, the moon clips are not required.
" onclick="window.open(this.href);return false;
" onclick="window.open(this.href);return false;
Note: Me sharing a link and information published by others does not constitute my endorsement, agreement, disagreement, my opinion or publishing by me. If you do not like what is contained at a link I share, take it up with the author or publisher of the content.
-
- Senior Member
- Posts in topic: 1
- Posts: 641
- Joined: Thu Jul 06, 2006 9:15 pm
Re: Ruger LCR now in 9mm
Is the 9mm LCR the same size as the 38/357? I wonder if it fits current holsters for the LCR is why I ask.