Ammo for lever rifle
Ammo for lever rifle
I just got a lever rifle in 357 mag. I know not to use pointed ammo. Flat point is best. Is it safe to use jacketed round nose?
Thanks in advance.
Donny.
Thanks in advance.
Donny.
Re: Ammo for lever rifle
I have a Henry in .44Mag. I haven't had any trouble with jacketed soft points with round noses. I haven't tried anything with points or hollow points. I kinds figured the hollow points might not feed properly, but what's the problem with pointed rounds?Don1911 wrote:I just got a lever rifle in 357 mag. I know not to use pointed ammo. Flat point is best. Is it safe to use jacketed round nose?
Thanks in advance.
Donny.
I am not and have never been a LEO. My avatar is in honor of my friend, Dallas Police Sargent Michael Smith, who was murdered along with four other officers in Dallas on 7.7.2016.
NRA Patriot-Endowment Lifetime Member---------------------------------------------Si vis pacem, para bellum.................................................Patriot Guard Rider
NRA Patriot-Endowment Lifetime Member---------------------------------------------Si vis pacem, para bellum.................................................Patriot Guard Rider
Re: Ammo for lever rifle
Good to know. Whew! Glad I hadn't tried that yet. Although, I haven't seen any pointed .44mag yet either.AndyC wrote:Pointed ammo in a tubular magazine can set off the primer of the round in front of it under recoil.
I am not and have never been a LEO. My avatar is in honor of my friend, Dallas Police Sargent Michael Smith, who was murdered along with four other officers in Dallas on 7.7.2016.
NRA Patriot-Endowment Lifetime Member---------------------------------------------Si vis pacem, para bellum.................................................Patriot Guard Rider
NRA Patriot-Endowment Lifetime Member---------------------------------------------Si vis pacem, para bellum.................................................Patriot Guard Rider
-
- Senior Member
- Posts in topic: 1
- Posts: 1269
- Joined: Mon Dec 17, 2012 10:36 pm
- Location: Northeast Fort Worth
Re: Ammo for lever rifle
I too think it's more about setting off the round in front with a pointed bullet. That's what I was always told anyways....
Final Shot offers Firearms / FFL Transfers / CHL Instruction. Please like our Facebook Page.
If guns kill people, do pens misspell words?
I like options: Sig Sauer | DPMS | Springfield Armory | Glock | Beretta
If guns kill people, do pens misspell words?
I like options: Sig Sauer | DPMS | Springfield Armory | Glock | Beretta
-
- Senior Member
- Posts in topic: 2
- Posts: 1715
- Joined: Mon Nov 16, 2009 4:58 am
- Location: Harris County
-
- Senior Member
- Posts in topic: 2
- Posts: 1715
- Joined: Mon Nov 16, 2009 4:58 am
- Location: Harris County
Re: Ammo for lever rifle
"Pointed" 44 Magazine for lever actionsC-dub wrote:Good to know. Whew! Glad I hadn't tried that yet. Although, I haven't seen any pointed .44mag yet either.AndyC wrote:Pointed ammo in a tubular magazine can set off the primer of the round in front of it under recoil.
Re: Ammo for lever rifle
Thanks for your quick informative responses. The round nose should be good for playing. Hollow points should be fine for defensive purposes if it functions properly. I've heard of leverevolution ammo. Haven't seen any to buy yet. I'll try some eventually. Maybe I'll see some at the gun show this weekend.
Thanks again everyone.
Donny
Thanks again everyone.
Donny
-
- Senior Member
- Posts in topic: 2
- Posts: 5776
- Joined: Sun Apr 12, 2009 5:01 pm
- Location: Austin area
Re: Ammo for lever rifle
Where'd you find one? New or used?Don1911 wrote:I just got a lever rifle in 357 mag. I know not to use pointed ammo. Flat point is best. Is it safe to use jacketed round nose?
Thanks in advance.
Donny.
Re: Ammo for lever rifle
Interesting stuff. However, at $1/round or more I'll pass.Carry-a-Kimber wrote:"Pointed" 44 Magazine for lever actionsC-dub wrote:Good to know. Whew! Glad I hadn't tried that yet. Although, I haven't seen any pointed .44mag yet either.AndyC wrote:Pointed ammo in a tubular magazine can set off the primer of the round in front of it under recoil.
I am not and have never been a LEO. My avatar is in honor of my friend, Dallas Police Sargent Michael Smith, who was murdered along with four other officers in Dallas on 7.7.2016.
NRA Patriot-Endowment Lifetime Member---------------------------------------------Si vis pacem, para bellum.................................................Patriot Guard Rider
NRA Patriot-Endowment Lifetime Member---------------------------------------------Si vis pacem, para bellum.................................................Patriot Guard Rider
-
- Senior Member
- Posts in topic: 4
- Posts: 5110
- Joined: Sat May 12, 2007 12:00 pm
- Location: North Texas
Re: Ammo for lever rifle
LEVERevolution ammo is indeed nice. Some folks change out their follower in the tube to one with a deeper dimple in the middle to accommodate the rubberized point of the bullet.
But there is a drawback with this ammo that many are not aware of. The brass cases of LEVERevolution ammo cannot be reloaded with standard round nose or flat point ammo.
This is because the LEVERevolution brass is slightly shorter than "normal" to achieve correct OAL for the pointed round.
You can buy LEVERevolution bullets that reload fine in this brass but "normal" bullets will be shorter in OAL if reloaded into LEVERevolution brass which could cause feed problems in the rifles. Could also increase possibility of an overcharge in the shorter case.
If you don't reload, then none of this means anything to you and will not affect you.
EDIT: Now I want to emphasize that this MAY not be as critical in the shorter pistol calibers as it is in say the 45-70 Govt. cal. I do not really have any first hand experience in this and I am not a re-loader. But in my travels searching for ammo for a 45-70 Govt. Marlin Lever (when I owned one) I found this info concerning the difference in length of "standard" Starline Brass and LEVERevolution Brass being shorter. Maybe a few re-loaders will chime in here to comment.
But there is a drawback with this ammo that many are not aware of. The brass cases of LEVERevolution ammo cannot be reloaded with standard round nose or flat point ammo.
This is because the LEVERevolution brass is slightly shorter than "normal" to achieve correct OAL for the pointed round.
You can buy LEVERevolution bullets that reload fine in this brass but "normal" bullets will be shorter in OAL if reloaded into LEVERevolution brass which could cause feed problems in the rifles. Could also increase possibility of an overcharge in the shorter case.
If you don't reload, then none of this means anything to you and will not affect you.
EDIT: Now I want to emphasize that this MAY not be as critical in the shorter pistol calibers as it is in say the 45-70 Govt. cal. I do not really have any first hand experience in this and I am not a re-loader. But in my travels searching for ammo for a 45-70 Govt. Marlin Lever (when I owned one) I found this info concerning the difference in length of "standard" Starline Brass and LEVERevolution Brass being shorter. Maybe a few re-loaders will chime in here to comment.
Last edited by AEA on Thu Feb 14, 2013 10:09 pm, edited 3 times in total.
Alan - ANYTHING I write is MY OPINION only.
Certified Curmudgeon - But, my German Shepherd loves me!
NRA-Life, USN '65-'69 & '73-'79: RM1
1911's RULE!
Certified Curmudgeon - But, my German Shepherd loves me!
NRA-Life, USN '65-'69 & '73-'79: RM1
1911's RULE!
-
- Senior Member
- Posts in topic: 2
- Posts: 5776
- Joined: Sun Apr 12, 2009 5:01 pm
- Location: Austin area
Re: Ammo for lever rifle
Now THAT is good info to know ... I was unaware of this with LeveRevolution .... need to sort out my Hornady headstamped .357 brass and double-check lengths (don't load .357 right now - only .38 - but will likely do so at some point in the future, thus saving up brass from my own use and various range pickups).
-
- Senior Member
- Posts in topic: 4
- Posts: 5110
- Joined: Sat May 12, 2007 12:00 pm
- Location: North Texas
Re: Ammo for lever rifle
I use Federal .38 158gr TMJ Flat Point +P ammo in my Rossi 92, or any Federal JHP ammo with no problems.
.357 for "Serious" work!
I edited my post above to insert a disclaimer on brass length.
.357 for "Serious" work!
I edited my post above to insert a disclaimer on brass length.
Alan - ANYTHING I write is MY OPINION only.
Certified Curmudgeon - But, my German Shepherd loves me!
NRA-Life, USN '65-'69 & '73-'79: RM1
1911's RULE!
Certified Curmudgeon - But, my German Shepherd loves me!
NRA-Life, USN '65-'69 & '73-'79: RM1
1911's RULE!
-
- Senior Member
- Posts in topic: 1
- Posts: 2574
- Joined: Sat Jan 12, 2013 4:27 pm
- Location: Vernon, Texas
Re: Ammo for lever rifle
My Henry "Big Boy" .357 feeds .38 Specials just as well as it feeds .357 Magnum ammo. I'll admit that I stick with flat-nose bullets, though. Just to be on the safe side...
-
- Senior Member
- Posts in topic: 2
- Posts: 26852
- Joined: Wed Jan 16, 2008 12:59 pm
- Location: North Richland Hills, Texas
- Contact:
Re: Ammo for lever rifle
[youtube][/youtube]C-dub wrote:Good to know. Whew! Glad I hadn't tried that yet. Although, I haven't seen any pointed .44mag yet either.AndyC wrote:Pointed ammo in a tubular magazine can set off the primer of the round in front of it under recoil.
“Hard times create strong men. Strong men create good times. Good times create weak men. And, weak men create hard times.”
― G. Michael Hopf, "Those Who Remain"
#TINVOWOOT
― G. Michael Hopf, "Those Who Remain"
#TINVOWOOT