For those of you using an outdoor range how high do you set your targets from the ground?
Also, is there a certain height that DPS requires?
Thanks Jarod
Target height
Moderators: carlson1, Crossfire
-
- Senior Member
- Posts in topic: 2
- Posts: 6267
- Joined: Wed Oct 28, 2009 7:14 am
- Location: Flint, TX
Re: Target height
I am not aware of any rules regarding the mounting height of the target, but presumably it should be such that the main target zone is at roughly eye level for the shooter. If you have an abnormally tall or short shooter, you could adjust the target appropriately if you wanted, though I'm unaware of ANYBODY that has done so.
Is there some specific reason you're asking?
Is there some specific reason you're asking?
Range Rule: "The front gate lock is not an acceptable target."
Never Forget.
Never Forget.
-
- Senior Member
- Posts in topic: 1
- Posts: 12329
- Joined: Sun Jun 12, 2005 3:31 pm
- Location: Angelina County
Re: Target height
No DPS required measurements.
On my OD range the top of my targets are about 5'6"
Welcome aboard.
LT
On my OD range the top of my targets are about 5'6"
Welcome aboard.
LT
Carry 24-7 or guess right.
CHL Instructor. http://www.pdtraining.us" onclick="window.open(this.href);return false;
NRA/TSRA Life Member - TFC Member #11
Re: Target height
I was thinking eye level but I wasn't real sure. Thanks
-
- Senior Member
- Posts in topic: 2
- Posts: 6267
- Joined: Wed Oct 28, 2009 7:14 am
- Location: Flint, TX
Re: Target height
Basically, you just want to make sure the rounds go into the backstop, and not over it. That could happen with a short shooter, and a high-mounted target. (Mainly for outdoor ranges.)
Range Rule: "The front gate lock is not an acceptable target."
Never Forget.
Never Forget.
Re: Target height
Basically, you just want to make sure the rounds go into the backstop, and not over it. That could happen with a short shooter, and a high-mounted target. (Mainly for outdoor ranges.)
As well as not hitting the ground in front of the "backstop" or berm which make it possible for the round to richochet in some other direction.