XDM hi cap magazines tough to load

Gun, shooting and equipment discussions unrelated to CHL issues

Moderator: carlson1

Post Reply

Topic author
easyridertejas
Junior Member
Posts in topic: 2
Posts: 10
Joined: Mon Mar 22, 2010 2:37 pm

XDM hi cap magazines tough to load

#1

Post by easyridertejas »

Hello to all bitter clingers and gun toters. I recently bought the XDM 9mm and it came with 2 hi cap magazins. They are trully tough to load. I sure cant see myself getting that done in a pinch without the little loader thingie. And chances are that if Atilla the punk is sending rounds uprange (at me) that i'm actually going to have that thingie with me. Anyone had the same problem or concern?
I'm not worried about a bullet with my name on it so much as the ones that say "to whom it may concern" on them.
User avatar

Keith B
Moderator
Posts in topic: 1
Posts: 18503
Joined: Sat Aug 18, 2007 3:29 pm

Re: XDM hi cap magazines tough to load

#2

Post by Keith B »

easyridertejas wrote:Hello to all bitter clingers and gun toters. I recently bought the XDM 9mm and it came with 2 hi cap magazins. They are trully tough to load. I sure cant see myself getting that done in a pinch without the little loader thingie. And chances are that if Atilla the punk is sending rounds uprange (at me) that i'm actually going to have that thingie with me. Anyone had the same problem or concern?
I can tell you that the chances of a CHL holder getting into a firefight are pretty well slim to none, and Slim left town. I carry a PM9 with 6+1, or a 1911 with 7+1 and a spare mag. The spare mag IMO is just if I have a malfunction on the first one and have to dump, slam and run. Once you get past the first 4-5 shots I don't think one of you will be around (either retreated or down.) However, that is not to say it couldn't happen, but in a self defense situation it is very unlikely.
Keith
Texas LTC Instructor, Missouri CCW Instructor, NRA Certified Pistol, Rifle, Shotgun Instructor and RSO, NRA Life Member

Psalm 82:3-4

RHenriksen
Senior Member
Posts in topic: 1
Posts: 2058
Joined: Sun Mar 01, 2009 1:59 pm
Location: Houston

Re: XDM hi cap magazines tough to load

#3

Post by RHenriksen »

a) load up the mags & leave them loaded. The springs will relax a bit, and you'll be able to top them off in the future w/o the loader tool.
b) If you need more than 17 rounds in a fight, carry a spare mag (loaded). If you need more than 35 rounds in a fight... can't help you there.
I'll quit carrying a gun when they make murder and armed robbery illegal

Houston Technology Consulting
soup-to-nuts IT infrastructure design, deployment, and support for SMBs
User avatar

AddyLO
Senior Member
Posts in topic: 1
Posts: 204
Joined: Sat Mar 13, 2010 12:42 am
Location: DFW

Re: XDM hi cap magazines tough to load

#4

Post by AddyLO »

I bought an XD9-SC back in January and was surprised at how tight the mag springs were. But after a few trips to the range they did loosen up quite a bit. I can now hand-load a magazine without tearing my thumb up too much but it's still not quite as easy to load as my Sig. The last couple of rounds are still pretty tough.

wilder
Member
Posts in topic: 1
Posts: 129
Joined: Tue Apr 01, 2008 11:01 am
Location: Denton, TX

Re: XDM hi cap magazines tough to load

#5

Post by wilder »

I had the same gun and it is hard to get all 19 rounds in the mags. One of the major points of having an XDm is that it holds 20 rounds. The need to reload seems far fetched at best.

Topic author
easyridertejas
Junior Member
Posts in topic: 2
Posts: 10
Joined: Mon Mar 22, 2010 2:37 pm

Re: XDM hi cap magazines tough to load

#6

Post by easyridertejas »

AddyLO wrote:I bought an XD9-SC back in January and was surprised at how tight the mag springs were. But after a few trips to the range they did loosen up quite a bit. I can now hand-load a magazine without tearing my thumb up too much but it's still not quite as easy to load as my Sig. The last couple of rounds are still pretty tough.

Thanks. Glad to hear that. I have been to the local range once with it, last weekend, and it is without a doubt the tightest magazine i have ever loaded, with or without the thingie. So i'll just load and unload them a few dozen times tonight and see if they will relax a bit. I dont want to look like i'm wrestling the giant anaconda again at the range. People look at me funny .

I really dont expect to get into the OK corral shootout, i was just being humorous ( i thought). I just like my stuff to work smooth and efficiently. Especially my bang bang.
I'm not worried about a bullet with my name on it so much as the ones that say "to whom it may concern" on them.

cohiba550
Member
Posts in topic: 1
Posts: 134
Joined: Sun Oct 04, 2009 7:20 pm
Location: Spring, TX.

Re: XDM hi cap magazines tough to load

#7

Post by cohiba550 »

easyridertejas wrote:Hello to all bitter clingers and gun toters. I recently bought the XDM 9mm and it came with 2 hi cap magazins. They are trully tough to load. I sure cant see myself getting that done in a pinch without the little loader thingie. And chances are that if Atilla the punk is sending rounds uprange (at me) that i'm actually going to have that thingie with me. Anyone had the same problem or concern?
Know how you feel, I've got four! Keep them all loaded up and roate through them at the range. Doesn't take long and gets easier but to be honest I still use the UpLULA, can load them in nothing flat. And if I need more than 4 fully loaded magazines there's too many bad guys.......lol
User avatar

joe817
Senior Member
Posts in topic: 1
Posts: 9316
Joined: Fri May 22, 2009 7:13 pm
Location: Arlington

Re: XDM hi cap magazines tough to load

#8

Post by joe817 »

I agree with the others. A fully charged mag in your gun, and a spare mag will suffice. ;-)

As far as the loading goes, go ahead and get a speed loader. It'll make life a lot easier when you are at the range.

I'm looking for one myself, but not the $29.95 one. I'm looking for the $6.95 one for my Colt Govt. .380 and they aren't the easiest to come by.
Diplomacy is the Art of Letting Someone Have Your Way
TSRA
Colt Gov't Model .380
User avatar

Teamless
Senior Member
Posts in topic: 1
Posts: 3241
Joined: Sat Mar 13, 2010 9:51 pm
Location: Houston, Texas

Re: XDM hi cap magazines tough to load

#9

Post by Teamless »

joe817 wrote:but not the $29.95 one
I have the 29.95 one from academy and it is very easy to use and well worth the price.
my wife's Glock even came with one specifically for a Glock magazine and this works immensely better than the Glock loader.
League City, TX
Yankee born, but got to Texas as fast as I could! NRA / PSC / IANAL
Post Reply

Return to “General Gun, Shooting & Equipment Discussion”