Dry Firing a 24/7 Pro

Gun, shooting and equipment discussions unrelated to CHL issues

Moderator: carlson1

Post Reply

Topic author
Sunnovah
Junior Member
Posts in topic: 2
Posts: 4
Joined: Mon Mar 30, 2009 9:16 am
Location: Houston, TX
Contact:

Dry Firing a 24/7 Pro

#1

Post by Sunnovah »

I have a Taurus 24/7 Pro DS.
In the manual it says that dry firing can harm this weapon.
I have also read on this forum that Dry firing is key to improving my marksmanship.
Can I decock and dry fire this pistol, or am I just out of luck as far as using it is concerned. I want to get comfortable with it in my hand since it will be my carry weapon.

Seeing as this is my first gun, I am still wet behind the ears with all the terminology, as well as any ability, though I did surprisingly well qualifying. :cool: Any advice is greatly appreciated.

P.S. If I get an Airsoft to practice with, should I go for a spring operated or co2 model?
I'd rather have a gun and not need it, than need a gun and not have it.
User avatar

fickman
Senior Member
Posts in topic: 1
Posts: 1711
Joined: Tue Nov 25, 2008 2:52 pm
Location: Fort Worth, Texas

Re: Dry Firing a 24/7 Pro

#2

Post by fickman »

I won't dry fire my guns. Try one of these: http://www.cabelas.com/prod-1/0006919220742a.shtml
Native Texian
User avatar

sbb
Senior Member
Posts in topic: 1
Posts: 239
Joined: Thu Aug 16, 2007 6:17 pm
Location: Houston

Re: Dry Firing a 24/7 Pro

#3

Post by sbb »

Get some snap caps. Then practice as much as you want. A-Zoom makes a great product. I believe that they are packed six to the pack.
"Those who expect to reap the blessings of freedom must, like men, undergo the fatigue of supporting it.” Thomas Paine

Topic author
Sunnovah
Junior Member
Posts in topic: 2
Posts: 4
Joined: Mon Mar 30, 2009 9:16 am
Location: Houston, TX
Contact:

Re: Dry Firing a 24/7 Pro

#4

Post by Sunnovah »

Well, that is cool. I didn't even know those existed. :) Thanks. I will try those out.
I'd rather have a gun and not need it, than need a gun and not have it.

WarHawk-AVG
Senior Member
Posts in topic: 2
Posts: 1403
Joined: Sat Jul 28, 2007 11:05 pm

Re: Dry Firing a 24/7 Pro

#5

Post by WarHawk-AVG »

sbb wrote:Get some snap caps. Then practice as much as you want. A-Zoom makes a great product. I believe that they are packed six to the pack.
If you are on the cheap and know someone who has a reloader

A. Get empty case
B. Get bullet
C. Get pencil eraser
D. Seat bullet in case
E. Cut pencil eraser to fit primer pocket
F. Glue pencil eraser in primer pocket
G. Paint bullet red or blue or some non standard color
H. Put in pistol, pull trigger and know you aren't dry firing

You could probably make 10-20 dry fire caps for the price of 1 of those "factory" dry fire caps
A sheepdog says "I will lead the way. I will set the highest standards. ...Your mission is to man the ramparts in this dark and desperate hour with honor and courage." - Lt. Col. Grossman
‘All that is necessary for the triumph of evil is that good men do nothing’ - Edmond Burke
User avatar

WildBill
Senior Member
Posts in topic: 1
Posts: 17350
Joined: Tue Jul 03, 2007 12:53 pm
Location: Houston

Re: Dry Firing a 24/7 Pro

#6

Post by WildBill »

You could probably do the same thing with some RTV Silicone.
NRA Endowment Member

TexasVet
Senior Member
Posts in topic: 2
Posts: 342
Joined: Fri Aug 01, 2008 1:42 pm

Re: Dry Firing a 24/7 Pro

#7

Post by TexasVet »

About the home made dummy rounds.. any specific type of paint you should or should not use ? Can you use steel or just brass case ?
Thanks

WarHawk-AVG
Senior Member
Posts in topic: 2
Posts: 1403
Joined: Sat Jul 28, 2007 11:05 pm

Re: Dry Firing a 24/7 Pro

#8

Post by WarHawk-AVG »

TexasVet wrote:About the home made dummy rounds.. any specific type of paint you should or should not use ? Can you use steel or just brass case ?
Thanks
Something that sticks...and wont come off easily

You want to make it look COMPLETELY different from your other rounds...and just scream "NOT A NORMAL BULLET" so you don't load one thinking its a live round and if faced with an intruder it goes "click" or you think a normal bullet is your unmarked dummy and you find out it goes "bang"
A sheepdog says "I will lead the way. I will set the highest standards. ...Your mission is to man the ramparts in this dark and desperate hour with honor and courage." - Lt. Col. Grossman
‘All that is necessary for the triumph of evil is that good men do nothing’ - Edmond Burke
User avatar

Skiprr
Moderator
Posts in topic: 1
Posts: 6458
Joined: Fri Oct 20, 2006 4:50 pm
Location: Outskirts of Houston

Re: Dry Firing a 24/7 Pro

#9

Post by Skiprr »

I think SnapCaps are a great, low-cost investment. I have some in every caliber for which I own guns. For me, it's less about protecting the firing pin than it is being able to practice an almost complete tactical manual-at-arms with the guns during dry fire, everything from reloads to malfunction drills.
Join the NRA or upgrade your membership today. Support the Texas Firearms Coalition and subscribe to the Podcast.
I’ve contacted my State Rep, Gary Elkins, about co-sponsoring HB560. Have you contacted your Rep?
NRA Benefactor Life Member

TexasVet
Senior Member
Posts in topic: 2
Posts: 342
Joined: Fri Aug 01, 2008 1:42 pm

Re: Dry Firing a 24/7 Pro

#10

Post by TexasVet »

[/quote]
Something that sticks...and wont come off easily
[/quote]
For those of us who don't paint much (other than walls) can you give us a good paint (specifics you may have used in the past that work) in lets say red or yellow that would work ? Would you just spray paint it ?
User avatar

jbirds1210
Senior Member
Posts in topic: 1
Posts: 3368
Joined: Sat Oct 22, 2005 5:36 pm
Location: Texas City, Texas

Re: Dry Firing a 24/7 Pro

#11

Post by jbirds1210 »

Skiprr wrote:I think SnapCaps are a great, low-cost investment. I have some in every caliber for which I own guns. For me, it's less about protecting the firing pin than it is being able to practice an almost complete tactical manual-at-arms with the guns during dry fire, everything from reloads to malfunction drills.
I agree. If dry firing a handgun harmed it.....I would be in very bad trouble.

Jason
NRA Life Member
TSRA Life Member

"No man stands so tall as when he stoops to help a child."

dcphoto
Senior Member
Posts in topic: 1
Posts: 383
Joined: Mon Mar 10, 2008 9:10 pm
Location: not Austin

Re: Dry Firing a 24/7 Pro

#12

Post by dcphoto »

I just re-read the manual for my 24/7. I didn't see anything that said you couldn't or shouldn't dry fire the 24/7. Personally, I have probably dry fired mine 10's of thousands of times, and it still works flawlessly. I don't think it is a problem, but if it makes you feel better then get some snap caps. I prefer A-Zoom to the plastic cheapies.

What page of the manual did you see that on, btw?
User avatar

DoubleJ
Senior Member
Posts in topic: 1
Posts: 2367
Joined: Fri Jul 13, 2007 9:29 am
Location: Seattle, Washington

Re: Dry Firing a 24/7 Pro

#13

Post by DoubleJ »

jbirds1210 wrote:
I agree. If dry firing a handgun harmed it.....I would be in very bad trouble.

Jason
It's juuuuuuuuuuuuuust a Glock, J, that's alllllllll :biggrinjester:
FWIW, IIRC, AFAIK, FTMP, IANAL. YMMV.

srothstein
Senior Member
Posts in topic: 1
Posts: 5298
Joined: Sat Dec 16, 2006 8:27 pm
Location: Luling, TX

Re: Dry Firing a 24/7 Pro

#14

Post by srothstein »

I recommend snap caps, but the brand is a little expensive in my opinion. We use safe-t-trainer brand dummy rounds for practice. The cost difference is amazing. They are not quite as nice as the snap caps, but tehy work for us (note the government guns instead of personal weapons though, we are not quite as careful with them).

here is a link (and you can order this type of supplies from GT):
http://www.gtdist.com/ProductDetail.asp ... PGS-SAFTTX" onclick="window.open(this.href);return false;
Steve Rothstein
Post Reply

Return to “General Gun, Shooting & Equipment Discussion”