Page 1 of 5

Ham roll call?

Posted: Fri Aug 21, 2015 1:54 pm
by OldCannon
Finally got my tech license a couple months ago and my vanity approved last month:

K0GAR (it's in honor of my baby brother who passed from cancer five years ago)

Anyway, I have a Kenwood TM-D710GA in my truck and a Kenwood TH-D72A, but still haven't made my first contact yet (just lurking so far).

Was curious how many other hams are here. I know a few of you use your callsigns as your login name, but wondered if there are others quietly lurking :coolgleamA:

Re: Ham roll call?

Posted: Fri Aug 21, 2015 2:00 pm
by Charles L. Cotton
KD5GR here, but you probably know that. You have two mighty fine radios there! I'm running Kenwood TM-V71A's in my car and as a base unit. I'm going to get A Yaesu FTM-400DR as soon as I get the DR-1X repeater up. It's for the Texas Youth Amateur Radio Club (http://www.TYARC.org).

Welcome to the hobby!
Chas.

Re: Ham roll call?

Posted: Fri Aug 21, 2015 2:19 pm
by Keith B
There is a topic running here that has a lot of the folks listed in it http://texaschlforum.com/viewtopic.php?f=83&t=70538

I am KEØFV

Re: Ham roll call?

Posted: Fri Aug 21, 2015 2:43 pm
by AlaskanInTexas
Welcome aboard! I think I was more excited to get my paper from the FCC than my plastic from DPS.

Re: Ham roll call?

Posted: Fri Aug 21, 2015 3:00 pm
by joe817
Congrats on the Tech license OldCannon. Hope you enjoy hamming. I know I have.

I'm AA5LD.

Re: Ham roll call?

Posted: Fri Aug 21, 2015 3:06 pm
by Richbirdhunter
Growing up in southern Commiefornia I bought a little hand held ham radio years ago for a Just in case situation. I'm not licensed and I've never used it but it's nice to have in the bug out bag.

Re: Ham roll call?

Posted: Fri Aug 21, 2015 3:23 pm
by JALLEN
I celebrated 56 years of being licensed a couple of months ago.

After 42 years of patient, persistent, experienced, dedicated, skillful procrastination, I upgraded from Advanced to Extra last fall.

I have a bunch of radios, Tentec Omni VI+, Elecraft K-2, ICOM 706MKIIG, MFJ 9020. My dipole came down this spring in the storms, so I put up a rotating dipole 44' long this summer. I also have a homebrew clone S9v31 that I built, using Petlowany coils for radials. HOA limitations, and the solid rock here makes a tower and rotating antennas a dicey proposition. I hope to try a ~300' loop before long. After decades of all sorts of activity, I only work QRP CW.

In my past life, I was a VC, EC, DXer, DFer, repeater trustee of a very large system in San Diego, and was a Radioman in the Navy Reserve before I got my commission.

My masterful procrastination drives my wife nuts. She wants me to join a support group, and I may, some day. I checked into it. They haven't met yet, so there is no rush.

Re: Ham roll call?

Posted: Fri Aug 21, 2015 3:55 pm
by cheezit
KF5ZYS, FORMER KF6RHT. Not on hf much do to hoa rules but everyonce in awhile ill string up a 6m delta or a 20m dipole. Home rig is a ft 857d , ht is a vx7r. Tring to find a 2m, 440 unit for the truck.
Close to 25 years now.
Congrats.

Re: Ham roll call?

Posted: Fri Aug 21, 2015 4:45 pm
by SA_Steve
I'm a General License since 1964, been inactive for 20 years
Got my ARRL QST subscription going
The equipment sure has changed in 20 years

I'm retired now and will get the Extra and try the repeater world

Reluctant to post my call, reveals way too much for the internet bad guys.

It is amazing to me what has happened as to loosening the requirements, no Morse code. Even my First Class Radiotelephone has been obsoleted (I understand the requirement to have it was keeping the ladies out).

Re: Ham roll call?

Posted: Fri Aug 21, 2015 6:42 pm
by OldGrumpy
KG5HTV here. Just got my Tech license in June. Have a Yaesu FT60R handheld. Want a base VHF/UHF and will get when I find a good used unit.

Re: Ham roll call?

Posted: Fri Aug 21, 2015 6:43 pm
by jamminbutter
KF5KGE and the wifey is KF5KGD.

Re: Ham roll call?

Posted: Fri Aug 21, 2015 8:40 pm
by jimlongley
K5NRA, was KF9TM, and N2AZM. A very long time ago (1955) I was a novice licensee for a year, and then in 1964 I got a tech license which I let lapse. I have no recollection of those calls.

Re: Ham roll call?

Posted: Sat Aug 22, 2015 9:51 am
by OldCannon
Keith B wrote:There is a topic running here that has a lot of the folks listed in it http://texaschlforum.com/viewtopic.php?f=83&t=70538

I am KEØFV
Weird. I did a search before posting and that thread didn't turn up, not sure why :(

Re: Ham roll call?

Posted: Sat Aug 22, 2015 9:54 am
by OldCannon
Charles L. Cotton wrote:You have two mighty fine radios there! I'm running Kenwood TM-V71A's in my car and as a base unit. ....
Welcome to the hobby!
Chas.
Thanks! There's sooooo much to learn with this thing, and (ironically) I don't have much of a commute to work (takes me a whole 10 minutes :lol: ), so I don't get much time to goof around right now. I definitely need to find a local Elmer who knows how to help me make the most of my 710 system.

Re: Ham roll call?

Posted: Sat Aug 22, 2015 11:11 am
by mojohn
KF5ZMD here. Been licensed a couple years now. Volunteer with a very great group, http://www.wc-ares.org/
Congrats!
John