I'm askeered of my wife...

Issues important to the ladies, with men and women welcome.

Moderators: carlson1, Crossfire

User avatar

sbb
Senior Member
Posts in topic: 2
Posts: 239
Joined: Thu Aug 16, 2007 6:17 pm
Location: Houston

Re: I'm askeered of my wife...

#16

Post by sbb »

boomerang wrote:If you crossed a Glock and a 1911, would you get a plastic frame striker fired pistol with a grip safety and a thumb safety?
Or you may get a sturdy steel framed pistol with a square slide that was double action and had a trigger safety. With an Austrian attitude........and hairy legs.
"Those who expect to reap the blessings of freedom must, like men, undergo the fatigue of supporting it.” Thomas Paine

B3XD
Member
Posts in topic: 1
Posts: 58
Joined: Sun Jun 24, 2007 9:25 pm
Location: Houston

Re: I'm askeered of my wife...

#17

Post by B3XD »

Like the XDm
User avatar

flintknapper
Banned
Posts in topic: 5
Posts: 4962
Joined: Sat Dec 03, 2005 8:40 pm
Location: Deep East Texas

Re: I'm askeered of my wife...

#18

Post by flintknapper »

The Annoyed Man wrote:
flintknapper wrote:
The Annoyed Man wrote:
flintknapper wrote:Say it isn't so! :???: ;-)
:smilelol5: I'm going to put it off as long as I can. Do you think there is hope for getting a boy 1911 and a girl Glock to make nice?

I suppose anything is possible....but the "smart money" says NO!

Going over to the "dark side". Sheeeesh... ;-)
Scripture does tell us not to be unequally yoked. I should spend some time in the word, and take it before the Lord in prayer before acting. God did not want the sons of Abraham to marry Canaanite women, but on the other hand, He did bless Moses, who married a Midianite woman.
What to do, what to do? "rlol"
Yes, we have ample evidence of people making wrong choices throughout history. :mrgreen: ;-)

Sethites marrying Canaanites, etc.

Moses certainly made his share of mistakes as well. Remember why he was not allowed to enter into the land of Canaan? While God certainly blessed Moses in certain ways, it doesn't necessarily follow that his marriage to the Midianite was a "blessing", or just something that God tolerated.
Spartans ask not how many, but where!
User avatar

Topic author
The Annoyed Man
Senior Member
Posts in topic: 6
Posts: 26866
Joined: Wed Jan 16, 2008 12:59 pm
Location: North Richland Hills, Texas
Contact:

Re: I'm askeered of my wife...

#19

Post by The Annoyed Man »

flintknapper wrote:Yes, we have ample evidence of people making wrong choices throughout history. :mrgreen: ;-)

Sethites marrying Canaanites, etc.

Moses certainly made his share of mistakes as well. Remember why he was not allowed to enter into the land of Canaan? While God certainly blessed Moses in certain ways, it doesn't necessarily follow that his marriage to the Midianite was a "blessing", or just something that God tolerated.
So you're saying that, if I buy a Glock some day, God won't let me into heaven? I don't cotton to that "works based" kind of faith. :mrgreen:

Hey, for you Glock afficionados out there, what's with the 15 round magazines that only hold 14 rounds? Wifey's gun came with three 15 round magazines. One of them holds 15 rounds. The other two only hold 14, no matter how much you try. Also, what does it take (besides dynamite) to remove a magazine floor plate so that you can inspect the inside for binding issues? My Kimber magazines hold all 7 rounds they're supposed to hold, no problems, no fuss.

:leaving
“Hard times create strong men. Strong men create good times. Good times create weak men. And, weak men create hard times.”

― G. Michael Hopf, "Those Who Remain"

#TINVOWOOT
User avatar

flintknapper
Banned
Posts in topic: 5
Posts: 4962
Joined: Sat Dec 03, 2005 8:40 pm
Location: Deep East Texas

Re: I'm askeered of my wife...

#20

Post by flintknapper »

The Annoyed Man wrote:
So you're saying that, if I buy a Glock some day, God won't let me into heaven?

No, I am just reminding you that the 1911 was given to us by John "Moses" Browning. ;-)
I don't cotton to that "works based" kind of faith.
:mrgreen:
Nor do I. We are on the same page there.
Hey, for you Glock afficionados out there, what's with the 15 round magazines that only hold 14 rounds? Wifey's gun came with three 15 round magazines. One of them holds 15 rounds. The other two only hold 14, no matter how much you try.
Not a Glock aficionado, but I do know the answer: The other two magazines are female, they do what they want, when they want, and you can not hold them "accountable". ;-)


(Ducking now.....)
Spartans ask not how many, but where!
User avatar

Crossfire
Moderator
Posts in topic: 1
Posts: 5405
Joined: Sun Jan 08, 2006 10:27 am
Location: DFW
Contact:

Re: I'm askeered of my wife...

#21

Post by Crossfire »

boomerang wrote:If you crossed a Glock and a 1911, would you get a plastic frame striker fired pistol with a grip safety and a thumb safety? "rlol"
Well, you might get a 1911 that was actually reliable. Nawww... too much to hope for.
Texas LTC Instructor, FFL, IdentoGO Fingerprinting Partner
http://www.Crossfire-Training.com

gmckinl
Senior Member
Posts in topic: 1
Posts: 406
Joined: Sat Jul 22, 2006 6:30 pm
Location: DFW-Area

Re: I'm askeered of my wife...

#22

Post by gmckinl »

If they are 15 rd mags (which is how I remember them) they WILL take all 15. Load'em up and leave 'em. Use the plastic loader if you have to. Once loaded, use the plastic loader to mash them down harder and hold it. Just smash them down over and over. They're tough, but guess what, you'll never lack for spring tension to feed the rounds.

congratulations to your wife on the class and the purchase. she'll enjoy I'm sure.
NRA Life Member

"The beauty of the second amendment is that it will not be needed until they try to take it." -- Thomas Jefferson
User avatar

Purplehood
Senior Member
Posts in topic: 3
Posts: 4638
Joined: Thu May 29, 2008 3:35 pm
Location: Houston, TX

Re: I'm askeered of my wife...

#23

Post by Purplehood »

The Annoyed Man wrote:
flintknapper wrote:Yes, we have ample evidence of people making wrong choices throughout history. :mrgreen: ;-)

Sethites marrying Canaanites, etc.

Moses certainly made his share of mistakes as well. Remember why he was not allowed to enter into the land of Canaan? While God certainly blessed Moses in certain ways, it doesn't necessarily follow that his marriage to the Midianite was a "blessing", or just something that God tolerated.
So you're saying that, if I buy a Glock some day, God won't let me into heaven? I don't cotton to that "works based" kind of faith. :mrgreen:

Hey, for you Glock afficionados out there, what's with the 15 round magazines that only hold 14 rounds? Wifey's gun came with three 15 round magazines. One of them holds 15 rounds. The other two only hold 14, no matter how much you try. Also, what does it take (besides dynamite) to remove a magazine floor plate so that you can inspect the inside for binding issues? My Kimber magazines hold all 7 rounds they're supposed to hold, no problems, no fuss.

:leaving
14 > 7
Life NRA
USMC 76-93
USAR 99-07 (Retired)
OEF 06-07
User avatar

anygunanywhere
Senior Member
Posts in topic: 3
Posts: 7877
Joined: Fri Apr 01, 2005 9:16 am
Location: Richmond, Texas

Re: I'm askeered of my wife...

#24

Post by anygunanywhere »

Purplehood wrote:
14 > 7
230>115

.45(11.43mm)>9mm

Anygunanywhere
"When democracy turns to tyranny, the armed citizen still gets to vote." Mike Vanderboegh

"The Smallest Minority on earth is the individual. Those who deny individual rights cannot claim to be defenders of minorities." – Ayn Rand
User avatar

KC5AV
Senior Member
Posts in topic: 1
Posts: 2118
Joined: Mon Nov 19, 2007 5:24 pm
Location: Marshall

Re: I'm askeered of my wife...

#25

Post by KC5AV »

anygunanywhere wrote:
Purplehood wrote:
14 > 7
230>115

.45(11.43mm)>9mm

Anygunanywhere
115x14=1610
230x7=1610

Just empty the magazine, and everything is equal.
NRA lifetime member
User avatar

Purplehood
Senior Member
Posts in topic: 3
Posts: 4638
Joined: Thu May 29, 2008 3:35 pm
Location: Houston, TX

Re: I'm askeered of my wife...

#26

Post by Purplehood »

When the thread devolved into higher algebra, I got lost...
Life NRA
USMC 76-93
USAR 99-07 (Retired)
OEF 06-07
User avatar

flintknapper
Banned
Posts in topic: 5
Posts: 4962
Joined: Sat Dec 03, 2005 8:40 pm
Location: Deep East Texas

Re: I'm askeered of my wife...

#27

Post by flintknapper »

Purplehood wrote:
The Annoyed Man wrote:
flintknapper wrote:Yes, we have ample evidence of people making wrong choices throughout history. :mrgreen: ;-)

Sethites marrying Canaanites, etc.

Moses certainly made his share of mistakes as well. Remember why he was not allowed to enter into the land of Canaan? While God certainly blessed Moses in certain ways, it doesn't necessarily follow that his marriage to the Midianite was a "blessing", or just something that God tolerated.
So you're saying that, if I buy a Glock some day, God won't let me into heaven? I don't cotton to that "works based" kind of faith. :mrgreen:

Hey, for you Glock afficionados out there, what's with the 15 round magazines that only hold 14 rounds? Wifey's gun came with three 15 round magazines. One of them holds 15 rounds. The other two only hold 14, no matter how much you try. Also, what does it take (besides dynamite) to remove a magazine floor plate so that you can inspect the inside for binding issues? My Kimber magazines hold all 7 rounds they're supposed to hold, no problems, no fuss.

:leaving
14 > 7
Not a problem, my Para holds 13+1 rounds of 45 acp (230 gr.) ;-)
Spartans ask not how many, but where!
User avatar

barres
Senior Member
Posts in topic: 1
Posts: 1118
Joined: Thu Jan 19, 2006 3:58 pm
Location: Prison City, Texas

Re: I'm askeered of my wife...

#28

Post by barres »

The Annoyed Man wrote:Hey, for you Glock afficionados out there, what's with the 15 round magazines that only hold 14 rounds? Wifey's gun came with three 15 round magazines. One of them holds 15 rounds. The other two only hold 14, no matter how much you try. Also, what does it take (besides dynamite) to remove a magazine floor plate so that you can inspect the inside for binding issues? My Kimber magazines hold all 7 rounds they're supposed to hold, no problems, no fuss.

:leaving
Glock mags are notorious for not wanting to take that last round when new. Load 'em up as full as you can get them. Use the mag loader that came with the pistol or an HKS mag loader, if you have one. Let it sit, loaded, for a day or two. Then it will be tolerable to load in the future.

The mag baseplate requires a tool to remove. Glock sells a tool for this purpose (and to detail strip the pistol) for around $7. I bought a 5/32 punch from the local hardware store for about $3. Start with an empty mag (duh). You will need to insert this tool through the baseplate in the hole in the middle of it. This will push a sub-plate out of the hole and compress the spring. Shift the tool toward the front of the mag, so the tool will slip in front of the spring. Lever the baseplate off of the front of the mag body. Some people find that compressing the sides of the mag body helps getting the baseplate off, but I don't think it makes a bit of difference, personally. Once you get the baseplate started in sliding off, remove the tool, and prepare to catch the spring and sub-plate before they launch out of the bottom of the mag body. Re-assembly is intuitive.
Remember, in a life-or-death situation, when seconds count, the police are only minutes away.

Barre

Mike from Texas
Senior Member
Posts in topic: 2
Posts: 632
Joined: Thu Apr 12, 2007 10:57 am
Location: D/FW Texas

Re: I'm askeered of my wife...

#29

Post by Mike from Texas »

My wife has recently become interested in getting her CHL ( :hurry: :hurry: :hurry: :hurry: ) and we have shot TONS of different handguns, including Glocks, Sigs, Kahrs, Kimbers, S&W Revolvers, etc....and when all the dust settled she flat shoots the Glocks better than any of the others. We will be getting her a G26. If I thought she would carry it all the time like she should it would probably be a G19. Now granted my Glocks have trigger works and I installed reduced power recoil springs in them to make it easier to operate the slide, but she flat likes them and shoots them better than the others. I would still eventually like to get her an airweight revolver, but for now she has made it abundantly clear that she wants a Glock.

The Glock magazines will hold full capacity but that last round can be challenging to say the least, especially on new magazines. Get you an UpLula magazine loader and all will be golden. You will wonder how you ever got by without it. Also, buy you a Glock disassembly tool. If you insist on removing the floor plate of the magazine you will need it or something similar as well as need it to detail strip the pistol.

Welcome to the world of the best battle weapon ever built. ;-)
A few Glocks, a few Kahrs, Dan Wesson CBOB 10mm, Dan Wesson CBOB 45ACP, Springer Champion Operator

****************************************************************************************************

CompVest
Senior Member
Posts in topic: 1
Posts: 3079
Joined: Sun Jan 02, 2005 7:17 pm

Re: I'm askeered of my wife...

#30

Post by CompVest »

Why would you want her to get a airwieght revolver? Five shots against a Glock 26 and the reloads are so much faster and the recoil is much easier to manage, I think you have a very smart wife!
Women on the DRAW – drill, revise, attain, win
Coached Practice Sessions for Women
Post Reply

Return to “Ladies”