http://www.grantcunningham.com/blog_fil ... icate.html" onclick="window.open(this.href);return false;
Is the Colt Python "delicate"?
Thursday, May 18, 2006 Filed in: Revolvers, Personal opinions, Gunsmithing
There is an assertion that comes up with surprising frequency, particularly in the internet age where everyone is an expert: the Colt Python (and all other Colt revolvers) are "delicate", "go out of time easily", or "not as strong/durable as a S&W."
Let's start with the construction: a Colt revolver, for any given frame size, is as strong as any gun with that frame size. Their metallurgy is absolutely the best, and their forged construction is of superior quality. They are superbly made, and their longevity is a testimony to that fact. You are never compromising when you choose a Colt!
How about the charge of "delicate" or "goes out of time easily"? In my work, I see a lot of Colts; I shoot them extensively myself. With proper maintenance, I've seen no tendency for any Colt to go out of time. Yet, the rumors persist!
Why do such opinions exist if there wasn't some basis to them? Is there some amount of truth? I think I can answer that!
Let's start with some facts: Colt revolvers have actions which are very refined. Their operating surfaces are very small, and are precisely adjusted to make the guns work properly. Setting them up properly is not a job for someone who isn't intimately familiar with their workings, and the gunsmith who works on them had better be accustomed to working at narrow tolerances, on small parts, under magnification.
Colt's design and construction is unique; it uses the hand (the "pawl" which rotates the cylinder) and the bolt (the stop at the bottom of the frame opening) to hold the cylinder perfectly still when the gun fires. The action is designed so that the hand - which is the easiest part to replace - will take the majority of the wear, and is expected to be changed when wear exceeds a specific point.
This is considered normal maintenance in a Colt revolver, which is not the case with any other brand. To get their famous "bank vault" cylinder locking and attendant accuracy, you have to accept a certain amount of maintenance; it goes with ownership of such a fine instrument.
I've often made the statement that a Colt is like a Ferrari; to get the gilt-edged performance, you have to accept that they will require more maintenance than a Ford pickup. Unlike gun owners, however, folks who own Italy's finest don't complain that they are more "delicate" than an F-150!
I truly think that the negative reputation that Colts have in some quarters is because their owners - unschooled in the uniqueness of the Colt action - apply the same standards of condition that they would to their more pedestrian S&W guns.
What standards? A Colt, when the trigger is pulled and held back, should have absolutely no cylinder rotation. None, zip, zilch - absolutely no movement at all! Not a little, not a bit, not a smidgen - zero movement. A S&W, on the other hand, normally has a bit of rotational play - which is considered absolutely normal and fine.
There's another measurement to consider: at rest, a Colt cylinder should move front-to-back no more than .003" (that's 3/1,000 of an inch.) This is - in the absolute worst case - about half of the allowable S&W movement!
Now, let's say a S&W owner, used to their looser standards of cylinder lockup, buys a Colt. He goes and shoots it a bit, and the hand (which probably has a bit of wear already, as he bought it used) is approaching the normal replacement interval. He checks his gun, and finds that the cylinder has just the slightest amount of movement when the trigger is back, and half of his S&W's longitudinal travel. Heck, he thinks, it's still a lot tighter than his Smith so it must be fine to keep shooting it.
WRONG! It's at this point that he should stop shooting, and take it to an experienced Colt gunsmith to have the action adjusted. Of course, he doesn't do this - he keeps shooting. The cylinder beats harder against the frame, compresses the ratchet (ejector), causing the hand to wear even faster, and the combination of the two leads to a worn bolt. If left unchecked, the worn bolt can do damage to the rebound lever. When it finally starts spitting lead and misfiring, he takes it in and finds to his astonishment that he's facing a $400 (or more!) repair bill, and perhaps a 6 month wait to find a new ratchet.
Of course, he'll now fire up his computer and declare to anyone who will listen that Colts are "delicate" and "go out of time easily" and are "hard to get parts for." That, folks, appears to be the true origin of these fallacies.
Colts do require more routine maintenance, and a more involved owner; that's a fact. But, as long as the maintenance is performed properly, a Colt will happily digest thousands upon thousands of rounds without complaint. The owners who take care of them will be rewarded with a gun that is a delight to shoot, wonderfully accurate, and visually unmatched. Those who don't will sell them off at a loss and complain on the internet.
I sincerely hope that you will choose to be the first type of Colt owner. If, however, you are the second, please drop me a note - I'm always in the market for Colt revolvers at fire-sale prices!
-=[ Grant ]=-
...I don't know what it is about a weapon that is out of reach for everyone, but I love em...LOL. Funny... I was looking for a model 29 but wanted the 29-2... now I went from having no Model 29-2 to having three. Two with consecutive serial numbers in 6"(brand new never fired...even have the stickers on the grips) and a beautiful 8 3/8th inch with the wood presentation case. 