Ruger LCR now in 9mm

Gun, shooting and equipment discussions unrelated to CHL issues

Moderator: carlson1

Post Reply

Topic author
Greybeard
Senior Member
Posts in topic: 1
Posts: 2410
Joined: Thu Dec 23, 2004 10:57 pm
Location: Denton County
Contact:

Ruger LCR now in 9mm

#1

Post by Greybeard »

Ruger expanding LRC product line, again. New 9mm 5-holer. About 4 ounces heavier than 38+P version. And evidently weighs just a bit more than .357 version. Moon clips optional ?http://www.ruger.com/news/2014-09-22.html
CHL Instructor since 1995
http://www.dentoncountysports.com "A Private Palace for Pistol Proficiency"

JRG
Senior Member
Posts in topic: 1
Posts: 1037
Joined: Sat Aug 26, 2006 7:57 pm
Location: Waxahachie, TX

Re: Ruger LCR now in 9mm

#2

Post by JRG »

Greybeard wrote:Ruger expanding LRC product line, again. New 9mm 5-holer. About 4 ounces heavier than 38+P version. And evidently weighs just a bit more than .357 version. Moon clips optional ?http://www.ruger.com/news/2014-09-22.html
I am seriously thinking about picking up one of these bad boys.

Joe

CoffeeNut
Senior Member
Posts in topic: 2
Posts: 799
Joined: Mon Nov 12, 2012 5:52 am
Location: San Antonio

Re: Ruger LCR now in 9mm

#3

Post by CoffeeNut »

Highly intrigued. I mean I already have an LCR in .22 Mag but a 9mm version is seriously hard to pass up even though I've got a small 9mm semi-auto that already fills the gap. Academy will be seeing a lot more of me until I can get my hands on one.
EDC: Sig Sauer P320SC / P238
User avatar

mojo84
Senior Member
Posts in topic: 5
Posts: 9043
Joined: Tue Jun 21, 2011 4:07 pm
Location: Boerne, TX (Kendall County)

Re: Ruger LCR now in 9mm

#4

Post by mojo84 »

I do not understand the appeal of a 9mm revolver. Can one of you give me some insight?
Note: Me sharing a link and information published by others does not constitute my endorsement, agreement, disagreement, my opinion or publishing by me. If you do not like what is contained at a link I share, take it up with the author or publisher of the content.
User avatar

Vol Texan
Senior Member
Posts in topic: 1
Posts: 2362
Joined: Mon Mar 12, 2012 2:18 am
Location: Houston
Contact:

Re: Ruger LCR now in 9mm

#5

Post by Vol Texan »

mojo84 wrote:I do not understand the appeal of a 9mm revolver. Can one of you give me some insight?
I tend to agree with you, but I'd say the company has done its homework on this one - they're not going to invest the money on the tooling if they think it is a failed proposition.

From the article referenced in the OP:
"Since its introduction in 2009, the LCR has become extremely popular with conceal carry customers seeking the simplicity of a revolver," said Chris Killoy, Ruger President and Chief Operating Officer. "Customers have been asking for a 9mm version due to ammo availability and compatibility with pistols. We were listening and have added a 9mm version of the LCR," he concluded.
Your best option for personal security is a lifelong commitment to avoidance, deterrence, and de-escalation.
When those fail, aim for center mass.

www.HoustonLTC.com Texas LTC Instructor | www.Texas3006.com Moderator | Tennessee Squire | Armored Cavalry

GlockDude26
Senior Member
Posts in topic: 1
Posts: 470
Joined: Tue Jul 23, 2013 7:00 am

Re: Ruger LCR now in 9mm

#6

Post by GlockDude26 »

5 rds of 9mm? and then transition to a glock? :lol:

kidding aside i could see this being a good backup gun on your ankle for sure :fire
"Our houses are protected by the Good Lord and a gun, you might em both if you show up here not welcome son" Josh Thompson- Way out here (best song ever) "eventually all citizens will become criminals with enough legislation....."

bryan1980
Member
Posts in topic: 1
Posts: 60
Joined: Thu Mar 13, 2014 6:52 am
Location: Fort Worth, TX

Re: Ruger LCR now in 9mm

#7

Post by bryan1980 »

I've always thought that 9MM (or any rimless cartridge) revolvers were odd and interesting. On one hand, it might be a hassle to have to use moon clips, but on the other hand, they also help with reloading. .38 Special isn't too hard to find in my area, but there's always a greater selection of 9MM pretty much anywhere. Plus, it's likely that most people already own something in 9MM, so you wouldn't have to start buying a different caliber just to feed one gun. As we all know, the truth will be in the sales numbers.
5/21/14 - Submitted online app.
5/24/14 - Class
5/27/14 - Submitted CHL-100 & checklist
7/18/14 - Plastic in hand
User avatar

mojo84
Senior Member
Posts in topic: 5
Posts: 9043
Joined: Tue Jun 21, 2011 4:07 pm
Location: Boerne, TX (Kendall County)

Re: Ruger LCR now in 9mm

#8

Post by mojo84 »

Vol Texan wrote:
mojo84 wrote:I do not understand the appeal of a 9mm revolver. Can one of you give me some insight?
I tend to agree with you, but I'd say the company has done its homework on this one - they're not going to invest the money on the tooling if they think it is a failed proposition.

From the article referenced in the OP:
"Since its introduction in 2009, the LCR has become extremely popular with conceal carry customers seeking the simplicity of a revolver," said Chris Killoy, Ruger President and Chief Operating Officer. "Customers have been asking for a 9mm version due to ammo availability and compatibility with pistols. We were listening and have added a 9mm version of the LCR," he concluded.

My question was 100% just that, a question. I have no opinion regarding their decision to make one or why people want one. Nor was I questioning their decision.

I'm just curious what the advantage or appeal of a 9mm revolver is.
Note: Me sharing a link and information published by others does not constitute my endorsement, agreement, disagreement, my opinion or publishing by me. If you do not like what is contained at a link I share, take it up with the author or publisher of the content.

Texsquatch
Senior Member
Posts in topic: 1
Posts: 576
Joined: Wed Aug 07, 2013 11:55 pm
Location: Central Texas

Re: Ruger LCR now in 9mm

#9

Post by Texsquatch »

I think one benefit contributing to the appeal of a 9mm revolver is that it makes one heck of a backup gun. If you carry a 9mm semiauto and run into trouble then you have a backup that eats the same ammo. I was shown once by an old timer how easy it is to load a revolver from a mag. Pretty quick and slick. Of course that would depend on whether it requires moon clips or not.
User avatar

mojo84
Senior Member
Posts in topic: 5
Posts: 9043
Joined: Tue Jun 21, 2011 4:07 pm
Location: Boerne, TX (Kendall County)

Re: Ruger LCR now in 9mm

#10

Post by mojo84 »

Texsquatch wrote: Of course that would depend on whether it requires moon clips or not.
It requires moon clips.
Note: Me sharing a link and information published by others does not constitute my endorsement, agreement, disagreement, my opinion or publishing by me. If you do not like what is contained at a link I share, take it up with the author or publisher of the content.

CoffeeNut
Senior Member
Posts in topic: 2
Posts: 799
Joined: Mon Nov 12, 2012 5:52 am
Location: San Antonio

Re: Ruger LCR now in 9mm

#11

Post by CoffeeNut »

mojo84 wrote:
Texsquatch wrote: Of course that would depend on whether it requires moon clips or not.
It requires moon clips.
No, they're optional. Moon clips just allow for use of the ejector.
EDC: Sig Sauer P320SC / P238
User avatar

mojo84
Senior Member
Posts in topic: 5
Posts: 9043
Joined: Tue Jun 21, 2011 4:07 pm
Location: Boerne, TX (Kendall County)

Re: Ruger LCR now in 9mm

#12

Post by mojo84 »

CoffeeNut wrote:
mojo84 wrote:
Texsquatch wrote: Of course that would depend on whether it requires moon clips or not.
It requires moon clips.
No, they're optional. Moon clips just allow for use of the ejector.
Interesting. What holds the shell in the cylinder if the moon clip is removed? I actually believe the moon clips are required and the moon clip is designed so that the shells can be ejected without having to use a moon clip tool.

From the Ruger website.
9mm Luger Model
The LCR® in 9mm Luger model has an optimized charge hole design for positive ejection over a wide range of ammunition. The easy to load full moon clips act as a speed loader for quick reloads and its design allows for loading and unloading without the use of a moon clip tool.
Then again, I may be misinterpreting what I am reading.
Last edited by mojo84 on Fri Sep 26, 2014 2:48 pm, edited 2 times in total.
Note: Me sharing a link and information published by others does not constitute my endorsement, agreement, disagreement, my opinion or publishing by me. If you do not like what is contained at a link I share, take it up with the author or publisher of the content.

LeonCarr
Senior Member
Posts in topic: 1
Posts: 483
Joined: Fri Dec 28, 2007 6:42 pm
Location: DFW

Re: Ruger LCR now in 9mm

#13

Post by LeonCarr »

For about the same amount of money you can have a 9mm semiauto about the same size that holds more than 5 rounds :).

I have never seen the need for a revolver that shoots semiautomatic pistol cartridges. Just buy a compact/subcompact semiautomatic pistol.

Just my .02,
LeonCarr
"Whitetail Deer are extinct because of rifles with telescopes mounted on them." - My 11th Grade English Teacher
User avatar

mojo84
Senior Member
Posts in topic: 5
Posts: 9043
Joined: Tue Jun 21, 2011 4:07 pm
Location: Boerne, TX (Kendall County)

Re: Ruger LCR now in 9mm

#14

Post by mojo84 »

Apparently, I am wrong. According to Jeff, http://www.gunblast.com/Ruger-LCR9mm.htm, the moon clips are not required.

" onclick="window.open(this.href);return false;
Note: Me sharing a link and information published by others does not constitute my endorsement, agreement, disagreement, my opinion or publishing by me. If you do not like what is contained at a link I share, take it up with the author or publisher of the content.

maximus2161
Senior Member
Posts in topic: 1
Posts: 641
Joined: Thu Jul 06, 2006 9:15 pm

Re: Ruger LCR now in 9mm

#15

Post by maximus2161 »

Is the 9mm LCR the same size as the 38/357? I wonder if it fits current holsters for the LCR is why I ask.
Post Reply

Return to “General Gun, Shooting & Equipment Discussion”