TexasCHLforum.com

mjoplin

olafpfj - If you are ever down in Houston send me a PM. I am out of 4895, but have 4064 that I run in my Garand. Would be happy to trade you a pound of that for a pound of that 335 you have. 48 gr behind a 150 gr bullet reasonably replicates M2 ball ammo and works with the standard gas plug.

I'm out of 335 and would like to load a few more .375 win for a contender.

olafpfj wrote:I'm running 38spl with 125gr Berrys and 4.2gr of Titegroup. Running low on bullets though and they're hard to come by. There are some options out there though.

Just ran 250rds of 223 using 55gr Hornady PSP over 24.7gr of H335 for my AR. Ran out of bullets and am waiting for some decent plinking bullets to come back in stock.

Trying out some heavier 65gr Sierra's for my CZ527 in 223. Found a few recommendations to try 24.5gr of H335 on this load.

Totally dead in the water on 303 british, 7.5 Swiss and 30-06 for my Garand until IMR4895 or H4895 becomes available again next century.

Thinking of working up a load for 9mm using Berry's 115gr and Titegroup.

I have 1.25lbs of Titegroup that my dad gave to me awhile ago and 8lbs of H335...and that's it If it isn't a load that uses those 2 powders I'm flapping in the breeze until the powder drought is over

mjoplin

Miss seeing frequent posts here. Is nobody reloading these days? Have gleaned a great amount of info from posts from those more experienced!

From my end have worked up some great loads on 7mm STW with IMR7828, am working on some new loads for 45 acp with Nosler 185gr JHPs (would appreciate anyone else's experience with this bullet in 1911's, especially using Clays as there is not a great amount of load data to be found), and just did some initial loads for .380 with Varget and 150gr Nosler ballistic tip bullets.

TexasCHLforum.com

Search found 2 matches

Re: Anybody Reloading???

Anybody Reloading???