Pictures of your "Black Guns"

[Carry-a-Kimber]

Here are 3 of my guns. The AK is black it just has wood furniture.. ;)

DSCF0696b.jpg

DSCF0701b.jpg

DSCF0702b.jpg

Is that a dedicated 22, or just an upper?

[74novaman]

millerk, how do you like that rail for the AK? used it to mount anything yet?

[Millerk420]

Here are 3 of my guns. The AK is black it just has wood furniture.. ;)

DSCF0696b.jpg

DSCF0701b.jpg

DSCF0702b.jpg

Is that a dedicated 22, or just an upper?

That is an M&P 15-22.

And I have not got to shoot anything from the rail, the problem I did find was that with the rail the rear iron sits below the rail and so i have to raise the sight a bit I am not sure if I will shoot point of aim point of impact now that the rear sight had to adjust up. I had it all the way down for 100 yards hitting POA/POI. I have a red/green dot I was going to put on it but i havent been out shooting our rifles yet, just too busy. this was a NCStar rail from amazon, it locks on nice and tight, but it isnt like the see through rail they make for the AR handle that you can see the ironsights through.

[mrmagnum]

Here is my converted saiga in 7.62. Not really finished though. midwest forearm, magpul ctr stock and afg, and troy industries flash hider are next.

here are my first shots with irons @50 yds.

[MadMonkey]

Gonna pick up a Viking Tactics Surefire G2 mount at the store at some point... right now the flashlight is held on with a leftover scope mount







With my M&P40





With duty belt



With USPc 9MM



With AK



Both in their compact versions...



AR isn't quite finished yet, but I'll post the pics anyway

[texanron]

Very nice MM!!

[MadMonkey]

Very nice MM!!

Thanks! I haven't owned an AR in years, so I figured it was about time. I built the lower from Palmetto State Armory parts, an MOE kit to be exact which came with an MOE stock, trigger guard and grip. That's a 14.5" 1/7 upper with a Midwest Industries T9 rail on top, also from Palmetto. Magpul backup sights, and I just ordered the light mount and a red dot sight from Primary Arms this morning

Eventually I'll have a sling and a red dot magnifier, and I'll be "done" until I find out what else would improve it. This was a budget rifle so I'm doing it as cheap as I can while still getting everything I want put on it... so far, minus the transfer fees, tax and shipping (and flashlight ) I'm at just under $820 (including the almost-$100 sights). Not half bad for everything it has on it!

[SQLGeek]

Wow, look at those. Wish I had that kind of gun budget still. Very nice.

[MadMonkey]

Wish I had that kind of gun budget still.

Me too

SCAR 17 is the one I'm really slobbering over, but until it's under $2k (and preferably closer to 1,600) it's out of the question. Even then, it'll take several paychecks to save up for it... unless I'm finally full time by then. I'm tired of working two days a week

[RECIT]

Wish I had that kind of gun budget still.

Me too

SCAR 17 is the one I'm really slobbering over, but until it's under $2k (and preferably closer to 1,600) it's out of the question. Even then, it'll take several paychecks to save up for it... unless I'm finally full time by then. I'm tired of working two days a week

If you can work just two days a week and still afford toys you are doing quite well...

[Kat]

Hi Y'all,

Newbie here. :-) My name is Kathleen but I go by "Kat".
I was introduced to this forum by Steve R. A gentleman and former LEO,
I value his friendship highly. He's good people!

Anyway, I purchased this Black Gun about a year before the last election.
The only drawback to owning one of these is all your fellow gun buddies want to play with it. <g>
Which I don't mind a bit... Cleaning guns is not a chore to me. Hoppe's #9 is like perfume to me,
likely due to lots of happy childhood memories watching dad clean his rifles after a weekend of
shooting up in the California mountains in the LA national forest. I grew up in that area and it
was legal back in the late 60's and early 70's to do that.

I'd like to post the pic here, but I can't seem to figure out how to do that?
Here is a tinypic URL instead. <http://i19.tinypic.com/80wu5pj.jpg>

I suppose there is an FAQ page for this forum where I can learn how to use the list properly
but I've never participated in a forum like this before. Just usenet and e-mail forums on
yahoogroups.

Cheers!
Kat

[Pawpaw]

Welcome Kat! That's a nice rifle!

As far as posting the pic, you already did the hard part by uploading it to a server. To post it, you just click the "Img" button above the reply box & paste the url where the curser is, between the tags.

[MadMonkey]

If you can work just two days a week and still afford toys you are doing quite well...

Thank God for housemates, which in turn create lower bills...

[5150sigy]

my Long Range precision 308 AR in its current form soon to be changed up with new optics from NightForce and probably a new Daniel Defense free float tube
and yes this is my first post I am 20 about to be 21 and hope to soon join the ranks of a CHL carrier in a few weeks