It's Coming - Tactical Edge Shooting Center in Roanoke
Moderator: carlson1
-
Topic author - Senior Member
- Posts in topic: 4
- Posts: 709
- Joined: Fri Dec 31, 2004 7:14 pm
- Location: Keller, TX
It's Coming - Tactical Edge Shooting Center in Roanoke
It's Coming. Hopefully we'll break ground in September. And hopefully we'll have the Grand Opening in January.
My website is up to track it's progress.
** Removed by Request from TESC **
Regards,
James
My website is up to track it's progress.
** Removed by Request from TESC **
Regards,
James
Last edited by extremist on Sun Feb 11, 2007 10:07 pm, edited 3 times in total.
TX LTC Instructor, NRA Endowment Life Member, USPSA CRO
NRA Handgun/Rifle/Shotgun/Home Firearm Safety, Chief Range Safety Officer
NRA Handgun/Rifle/Shotgun/Home Firearm Safety, Chief Range Safety Officer
-
- Senior Member
- Posts in topic: 1
- Posts: 6134
- Joined: Wed Jan 12, 2005 1:31 pm
- Location: Allen, TX
-
- Senior Member
- Posts in topic: 3
- Posts: 4331
- Joined: Wed May 04, 2005 6:40 pm
- Location: DFW area
- Contact:
Re: It's Coming - Tactical Edge Shooting Center in Roanoke
Good to hear from you. I heard you guys were set to open last fall. Look forward to seeing it.extremist wrote:It's Coming. Hopefully we'll break ground in September. And hopefully we'll have the Grand Opening in January.
My website is up to track it's progress.
http://www.gunfaqs.org/Tactical_Edge/Index.htm
Regards,
James
*CHL Instructor*
"Speed is Fine, but accuracy is final"- Bill Jordan
Remember those who died, remember those who killed them.
"Speed is Fine, but accuracy is final"- Bill Jordan
Remember those who died, remember those who killed them.
-
- Junior Member
- Posts in topic: 2
- Posts: 34
- Joined: Sat Sep 30, 2006 6:40 pm
- Location: DFW
Any update on this place? I work right across from where they say they are going to break ground and have not seen anything but the grass grow?
I checked the website and no updates either.
It would be great to have somewhere to go shoot at lunch!
I checked the website and no updates either.
It would be great to have somewhere to go shoot at lunch!
Time Line
Oct 14th Class
Oct 21st Mailed Application
Oct 23rd Application Rcvd
Nov 21st Rcvd Pin
Dec 12 Licenese Issued
License Rcvd 12/11/06
Sig 226R 9MM
Para Ord LTC .45
Oct 14th Class
Oct 21st Mailed Application
Oct 23rd Application Rcvd
Nov 21st Rcvd Pin
Dec 12 Licenese Issued
License Rcvd 12/11/06
Sig 226R 9MM
Para Ord LTC .45
-
- Moderator
- Posts in topic: 3
- Posts: 5404
- Joined: Sun Jan 08, 2006 10:27 am
- Location: DFW
- Contact:
Here is the email reply I got from Mark this morning:
Hi,
We are still on track to be moving dirt in a few days. We are still waiting for TXDOT to get us the formal letter approving the drainage easement work. Once they do that, we can pick up the building permit and start work.
Hope to have the equipment coming in the next week or so and get things rolling. We are staging a sit in at TXDOT today untill they give us our stuff.
Mark
Hi,
We are still on track to be moving dirt in a few days. We are still waiting for TXDOT to get us the formal letter approving the drainage easement work. Once they do that, we can pick up the building permit and start work.
Hope to have the equipment coming in the next week or so and get things rolling. We are staging a sit in at TXDOT today untill they give us our stuff.
Mark
-
- Junior Member
- Posts in topic: 2
- Posts: 34
- Joined: Sat Sep 30, 2006 6:40 pm
- Location: DFW
llwatson thanks for the update. When I left work last night I still see an emtpy field so I am guessing either they ran into issues and are delayed in building. i emailed the owners yesterday but have not heard back yet.
Hopefully they will be able to break ground before the new year.
Hopefully they will be able to break ground before the new year.
Time Line
Oct 14th Class
Oct 21st Mailed Application
Oct 23rd Application Rcvd
Nov 21st Rcvd Pin
Dec 12 Licenese Issued
License Rcvd 12/11/06
Sig 226R 9MM
Para Ord LTC .45
Oct 14th Class
Oct 21st Mailed Application
Oct 23rd Application Rcvd
Nov 21st Rcvd Pin
Dec 12 Licenese Issued
License Rcvd 12/11/06
Sig 226R 9MM
Para Ord LTC .45
-
Topic author - Senior Member
- Posts in topic: 4
- Posts: 709
- Joined: Fri Dec 31, 2004 7:14 pm
- Location: Keller, TX
Latest Update as of 11/12/06:
James
Regards,As most of you know, we have finished all approvals and hearings with the City of Roanoke. We have been waiting on TXDOT to provide final approval of the drainage channel improvements we have submitted. We received an e-mail from the engineer overseeing this last Friday stating it was approved and awaiting her bosses signature. We will be pushing that issue hard first thing tomorrow morning, and hope to have our building permit in hand by the end of tomorrow. If we are successful with that, we should have the site work underway this week.
The latest construction schedule based on the late November starting date would have us opening in May of 2007. Good weather could shorten that up some, but be prepared for weather related delays as the project progresses.
James
TX LTC Instructor, NRA Endowment Life Member, USPSA CRO
NRA Handgun/Rifle/Shotgun/Home Firearm Safety, Chief Range Safety Officer
NRA Handgun/Rifle/Shotgun/Home Firearm Safety, Chief Range Safety Officer
I for one welcome a NFA friendly range, I just have a SBR(semi auto only) and cannot use it at Quail Creek.
As I live in Haslet This new facility will be in a great location.
Any idea on the policy of FMJ rifle ammunition use ?(my CMP M1 Garand & others, are gathering dust because of all the NO FMJ use policies locally)
Intrested in submitting a Resume When things get to that point in construction.
As I live in Haslet This new facility will be in a great location.
Any idea on the policy of FMJ rifle ammunition use ?(my CMP M1 Garand & others, are gathering dust because of all the NO FMJ use policies locally)
Intrested in submitting a Resume When things get to that point in construction.
CHL,C&R Lic.,NFA owner
-
- Banned
- Posts in topic: 4
- Posts: 632
- Joined: Tue Nov 14, 2006 5:05 pm
- Location: yes, I have one.