Grapevine Mills Mall
Moderators: carlson1, Charles L. Cotton
-
Topic author - Banned
- Posts in topic: 3
- Posts: 9
- Joined: Wed Jul 09, 2008 9:46 pm
- Location: Wichita Falls, TX.
Grapevine Mills Mall
While visiting the Grapevine Mills Mall in the Metroplex, I noticed that it has large green signs that state that no handguns are allowed in the mall. Since these are not 30.06 signs, are they valid? Or does it not matter since the mall might be private property.
CZ SP01
CZ P01
CZ 2075 RAMI, alloy 9mm
Springfield XDm Stainless
Springfield XD-45 Stainless Service Model
Kel-Tec PLR-16
CZ P01
CZ 2075 RAMI, alloy 9mm
Springfield XDm Stainless
Springfield XD-45 Stainless Service Model
Kel-Tec PLR-16
-
- Senior Member
- Posts in topic: 2
- Posts: 6134
- Joined: Wed Jan 12, 2005 1:31 pm
- Location: Allen, TX
Re: Grapevine Mills Mall
I wonder when they changed their signs?
Which entrance did you go through, the front entrance has had a very compliant sign for years.
Which entrance did you go through, the front entrance has had a very compliant sign for years.
Real gun control, carrying 24/7/365
-
Topic author - Banned
- Posts in topic: 3
- Posts: 9
- Joined: Wed Jul 09, 2008 9:46 pm
- Location: Wichita Falls, TX.
Re: Grapevine Mills Mall
I usually enter the entrance with the football in front. Jim, does this mean that the mall is a legitimate no carry mall?
CZ SP01
CZ P01
CZ 2075 RAMI, alloy 9mm
Springfield XDm Stainless
Springfield XD-45 Stainless Service Model
Kel-Tec PLR-16
CZ P01
CZ 2075 RAMI, alloy 9mm
Springfield XDm Stainless
Springfield XD-45 Stainless Service Model
Kel-Tec PLR-16
-
- Senior Member
- Posts in topic: 2
- Posts: 1886
- Joined: Mon Mar 28, 2005 10:11 am
- Location: Leander, TX
- Contact:
Re: Grapevine Mills Mall
Only if you received legal notification - which YOU did not.rudy64 wrote:I usually enter the entrance with the football in front. Jim, does this mean that the mall is a legitimate no carry mall?
-
Topic author - Banned
- Posts in topic: 3
- Posts: 9
- Joined: Wed Jul 09, 2008 9:46 pm
- Location: Wichita Falls, TX.
Re: Grapevine Mills Mall
Well I agree with this assessment, will the police or a DA see it that way? It's just that I have never had a run in with the law and I don't want to either.
CZ SP01
CZ P01
CZ 2075 RAMI, alloy 9mm
Springfield XDm Stainless
Springfield XD-45 Stainless Service Model
Kel-Tec PLR-16
CZ P01
CZ 2075 RAMI, alloy 9mm
Springfield XDm Stainless
Springfield XD-45 Stainless Service Model
Kel-Tec PLR-16
-
- Senior Member
- Posts in topic: 2
- Posts: 3532
- Joined: Fri Dec 02, 2005 3:06 am
- Location: SE Texas
Re: Grapevine Mills Mall
Grapevine Mills and Katy Mills malls have been discussed many times. Please use the search function.
The issue has always been that the otherwise compliant signs are posted on the side walls inside the mall entrances.
Thus they are not obvious. But I don't recall anyone stating that the signs were not compliant in content and size.
Mills Corp recently sold these properties. If they have changed out compliant 30.06 signs for non-compliant ones, it could reflect a change in corporate policy. But that's just wishful thinking.
The issue has always been that the otherwise compliant signs are posted on the side walls inside the mall entrances.
Thus they are not obvious. But I don't recall anyone stating that the signs were not compliant in content and size.
Mills Corp recently sold these properties. If they have changed out compliant 30.06 signs for non-compliant ones, it could reflect a change in corporate policy. But that's just wishful thinking.
Mike
AF5MS
TSRA Life Member
NRA Benefactor Member
AF5MS
TSRA Life Member
NRA Benefactor Member
Re: Grapevine Mills Mall
Anybody want to volunteer to make a camera run and post the pictures here?
-
- Senior Member
- Posts in topic: 1
- Posts: 342
- Joined: Sun May 11, 2008 12:35 am
Re: Grapevine Mills Mall
Grapevine Mills posts 30.06 signs that reference the orginal bill in 1995 when the CHL laws were enacted. However, their signs have not been updated to the current 30.06 wording. Technically, they are non-compliant signs. If you call Grapevine Police department they will tell you that Grapevine Mills is off limits for CHL. They do not want CHL holders carrying on their property. They have been lazy about updating their signs. So the choice is yours. If you get caught, I doubt that the arresting officer is going to buy your non-compliance story. He'll let the lawyers and judges figure it out.
Last edited by BigBlueDodge on Tue Jul 15, 2008 7:32 pm, edited 1 time in total.
-
- Senior Member
- Posts in topic: 2
- Posts: 3532
- Joined: Fri Dec 02, 2005 3:06 am
- Location: SE Texas
Re: Grapevine Mills Mall
I know what you're saying, but 30.06 didn't exist in the 1995 version. Apparently you are correct about the old signs. Living in Houston, I could only judge by Katy Mills, which has compliant 30.06 signs, but out of clear view.BigBlueDodge wrote:Grapevine Mills posts 30.06 signs that were compliant back in 1995 when the CHL laws were enacted.
Mike
AF5MS
TSRA Life Member
NRA Benefactor Member
AF5MS
TSRA Life Member
NRA Benefactor Member
-
- Moderator
- Posts in topic: 3
- Posts: 5404
- Joined: Sun Jan 08, 2006 10:27 am
- Location: DFW
- Contact:
Re: Grapevine Mills Mall
Here ya go. I ran right out there, just for YOU!SC1903A3 wrote:Anybody want to volunteer to make a camera run and post the pictures here?
-
- Senior Member
- Posts in topic: 1
- Posts: 553
- Joined: Sun Apr 13, 2008 12:55 pm
- Location: Houston
Re: Grapevine Mills Mall
Well, my gun doesn't look like that, so there. Obviously they don't want white cartoonish looking revolvers like the one from "Who Framed Roger Rabbit."
Walther P99AS 9mm
Beretta PX4sc 9mm
Walther P99 .40 S&W
FrankenAR-15
Type II Phaser
Beretta PX4sc 9mm
Walther P99 .40 S&W
FrankenAR-15
Type II Phaser
-
- Banned
- Posts in topic: 1
- Posts: 647
- Joined: Mon Apr 21, 2008 1:11 pm
- Location: DFW Texas
- Contact:
Re: Grapevine Mills Mall
Its a derringeragbullet2k1 wrote:Well, my gun doesn't look like that, so there. Obviously they don't want white cartoonish looking revolvers like the one from "Who Framed Roger Rabbit."
-
- Senior Member
- Posts in topic: 1
- Posts: 2367
- Joined: Fri Jul 13, 2007 9:29 am
- Location: Seattle, Washington
Re: Grapevine Mills Mall
...was just thinking the same thingKaiserB wrote:Its a derringeragbullet2k1 wrote:Well, my gun doesn't look like that, so there. Obviously they don't want white cartoonish looking revolvers like the one from "Who Framed Roger Rabbit."
FWIW, IIRC, AFAIK, FTMP, IANAL. YMMV.
-
- Senior Member
- Posts in topic: 2
- Posts: 6134
- Joined: Wed Jan 12, 2005 1:31 pm
- Location: Allen, TX
Re: Grapevine Mills Mall
That's pretty much the same sign I recall from several years ago, but it wasn't at all entrances, just entrance 2, which most people think of as the main entrance, is that still the case?
Real gun control, carrying 24/7/365