Page 1 of 1
XL 650 Shellplate caps
Posted: Wed Apr 29, 2020 7:30 pm
by thatguy
There are 5 plastic caps on top of the shellplate which I seem to have extra with my spare parts kit, my question is what do they do and how do you keep them in place? I thought they snapped in but that is not the case.
Re: XL 650 Shellplate caps
Posted: Fri May 01, 2020 12:33 pm
by T.O.M.
What do you mean by caps can you find the part on Dillon's web site and a different name of the part
Re: XL 650 Shellplate caps
Posted: Fri May 01, 2020 4:47 pm
by thatguy
Dillon part number 14050 shellplate cap, there is 5 in total and the response from Dillon was that they'd snap into place which is not the case. There purpose is to prevent debris from going through the dent holes in the shellplate into or onto the platform part number 22060.
It looks like I'll be using glue
Re: XL 650 Shellplate caps
Posted: Fri May 01, 2020 7:59 pm
by SigM4
george wrote: ↑Fri May 01, 2020 5:01 pm
Not positive, but on the old shell plates, those plugs were molded in.
All mine are.
