Am I the only one who prefers mil-spec AR mags?
Moderator: carlson1
-
Topic author - Senior Member
- Posts in topic: 1
- Posts: 3032
- Joined: Thu May 01, 2008 10:12 am
- Location: Northern Colorado
Am I the only one who prefers mil-spec AR mags?
I see it all the time..."you have to buy PMags, you must buy welded mags."
I'm sorry, but give me my $5 mil-spec AR mag. It served me well in the service. I've never had any FT* issues with them. If I ding or scuff them, big whoop.
I just don't see the need for a $30 AR mag.
What am I missing?
I'm sorry, but give me my $5 mil-spec AR mag. It served me well in the service. I've never had any FT* issues with them. If I ding or scuff them, big whoop.
I just don't see the need for a $30 AR mag.
What am I missing?
*NRA Endowment Member* | Veteran
Vote Adam Kraut for the NRA Board of Directors - http://www.adamkraut.com/
Vote Adam Kraut for the NRA Board of Directors - http://www.adamkraut.com/
-
- Senior Member
- Posts in topic: 2
- Posts: 26851
- Joined: Wed Jan 16, 2008 12:59 pm
- Location: North Richland Hills, Texas
- Contact:
Re: Am I the only one who prefers mil-spec AR mags?
Back your truck over 3 of your mil-spec mags ($15 worth), then back your truck over one PMAG ($15 worth) three times. Then take all 4 mags to the range. You won't be using the mil-specs because they'll be flat and you can't put cartridges in them. But you'll be using that PMag for the next 10 years. By then, you could have spent $500 on mil-spec mags.pbwalker wrote:I see it all the time..."you have to buy PMags, you must buy welded mags."
I'm sorry, but give me my $5 mil-spec AR mag. It served me well in the service. I've never had any FT* issues with them. If I ding or scuff them, big whoop.
I just don't see the need for a $30 AR mag.
What am I missing?
The mil-spec mags that came with my Bushmaster literally fell apart after a few trips to the range and some hard time holding down the carpeting on the shelf of my safe. So did the mil-spec mags I bought to replace them. The welding at the seams came apart. PMAGs have corrosion resistant stainless steel springs and anti-tilt, self-lubricating followers. They are rugged. They have dust covers to keep the ammo in them clean until you pop them off to use them.
Yes, they cost more. Three times as much, in fact. But they will last for years and years and years. Self-destructing $5 mags are fine if you have the U.S government's magazine budget. But for those of us who don't, a few PMAGS that will likely never need to be replaced really are the better solution.
That's my justification. It might not work for everyone, but it works for me. I have 14 of them, but I didn't pay for all of them. Some were gifts from my son.
“Hard times create strong men. Strong men create good times. Good times create weak men. And, weak men create hard times.”
― G. Michael Hopf, "Those Who Remain"
#TINVOWOOT
― G. Michael Hopf, "Those Who Remain"
#TINVOWOOT
-
- Banned
- Posts in topic: 1
- Posts: 4962
- Joined: Sat Dec 03, 2005 8:40 pm
- Location: Deep East Texas
Re: Am I the only one who prefers mil-spec AR mags?
No pmags here (not because they are not good though).
I use C-Products Stainless Steel. Very rugged and reliable.
I use C-Products Stainless Steel. Very rugged and reliable.
Spartans ask not how many, but where!
-
- Junior Member
- Posts in topic: 2
- Posts: 35
- Joined: Sat May 01, 2010 10:51 pm
- Location: Spring, TX
Re: Am I the only one who prefers mil-spec AR mags?
+1 on the C-Products SS mags. I use mil-spec also. No problems with either, but I never ran them over with my truck (accidentally or on purpose ).
Jim
NRA, TSRA, SAF Life Member, PSC Shooting Club
NRA, TSRA, SAF Life Member, PSC Shooting Club
-
- Senior Member
- Posts in topic: 2
- Posts: 426
- Joined: Thu Jun 12, 2008 10:14 am
- Location: Dallas, TX (North Dallas)
Re: Am I the only one who prefers mil-spec AR mags?
To take it even further.....buy one Eastern Bloc AK Mag, buy any AR mag. Open two bottles of beer with the feed lips of of each mag. Throw the broken AR mag down range and shoot it up with the AK. Then have a seat, drink your beer, ask yourself why AR mags are so cheaply made.
Re: Am I the only one who prefers mil-spec AR mags?
Ditto to that...... on the AR mag issue, i've never used P-mags, just plain old USGI. Can't say i've never had a problem with them, but then again i'm just not willing to spend the money on P-mags. If my life depended on it I might think differently, but it doesn't.jeeperbryan wrote:To take it even further.....buy one Eastern Bloc AK Mag, buy any AR mag. Open two bottles of beer with the feed lips of of each mag. Throw the broken AR mag down range and shoot it up with the AK. Then have a seat, drink your beer, ask yourself why AR mags are so cheaply made.
-
- Senior Member
- Posts in topic: 1
- Posts: 2099
- Joined: Tue May 05, 2009 9:19 pm
- Location: Houston Northwest
Re: Am I the only one who prefers mil-spec AR mags?
My Rifle is a TEOTWAWKI Rifle. So I got Mags that should last until then, and maybe afterwords. Pmags
Also, I have this really annoying habit to 'go big or go home' or 'why buy mediocre when you can get the best' attitude towards everything.
My first handgun that I bought myself was a $1200 1911... skipped the entire Revolver/Glock/Other Cheaper handgun and went straight to the best
Dunno why, but that's just how I am. Mediocre doesn't cut it around me, for anything.
Granted, the counter arguement for my arguement would be that you can purchase 3x as many GI mags as pmags, load em up once, use em, and then discard em, because in a real TEOTWAWKI scenario, are you really going to go back and pick up your mags? I guess it depends on how the world was ending... Zombies... probably not. Defending your home after a natural disaster, probably.
Also, I have this really annoying habit to 'go big or go home' or 'why buy mediocre when you can get the best' attitude towards everything.
My first handgun that I bought myself was a $1200 1911... skipped the entire Revolver/Glock/Other Cheaper handgun and went straight to the best
Dunno why, but that's just how I am. Mediocre doesn't cut it around me, for anything.
Granted, the counter arguement for my arguement would be that you can purchase 3x as many GI mags as pmags, load em up once, use em, and then discard em, because in a real TEOTWAWKI scenario, are you really going to go back and pick up your mags? I guess it depends on how the world was ending... Zombies... probably not. Defending your home after a natural disaster, probably.
IANAL, YMMV, ITEOTWAWKI and all that.
Re: School events, NOT on school property
Re: Parking Lots, 30.06, and MPA
Re: School events, NOT on school property
Re: Parking Lots, 30.06, and MPA
-
- Senior Member
- Posts in topic: 2
- Posts: 426
- Joined: Thu Jun 12, 2008 10:14 am
- Location: Dallas, TX (North Dallas)
Re: Am I the only one who prefers mil-spec AR mags?
Well, I wouldn't classify anything AR15/M16 or 1911 related as TEOTWAWKI. If it was truly the end of the world, those with the AK47s and Glocks would survive.dicion wrote:My Rifle is a TEOTWAWKI Rifle. So I got Mags that should last until then, and maybe afterwords. Pmags
Also, I have this really annoying habit to 'go big or go home' or 'why buy mediocre when you can get the best' attitude towards everything.
My first handgun that I bought myself was a $1200 1911... skipped the entire Revolver/Glock/Other Cheaper handgun and went straight to the best
Dunno why, but that's just how I am. Mediocre doesn't cut it around me, for anything.
Granted, the counter arguement for my arguement would be that you can purchase 3x as many GI mags as pmags, load em up once, use em, and then discard em, because in a real TEOTWAWKI scenario, are you really going to go back and pick up your mags? I guess it depends on how the world was ending... Zombies... probably not. Defending your home after a natural disaster, probably.
And this is coming from a guy that has a super expensive 1911 and a few high-end AR15s. I'll still go with my $400 AKs and Glocks :)
-
- Member
- Posts in topic: 1
- Posts: 199
- Joined: Tue Dec 29, 2009 4:35 pm
- Location: Round Rock, TX
Re: Am I the only one who prefers mil-spec AR mags?
The AR-15 is new to me, I've had mine about 6 months now.
I think I prefer the Pmag's to USGI mags, simply because I'm an AR Newb.
The Pmag torture tests I viewed on YouTube also helped convince me to go with the Pmags.
...and I'm sure owning a plastic gun (Glock 22) pushed me to buy plastic mags...
I think I prefer the Pmag's to USGI mags, simply because I'm an AR Newb.
The Pmag torture tests I viewed on YouTube also helped convince me to go with the Pmags.
...and I'm sure owning a plastic gun (Glock 22) pushed me to buy plastic mags...
took chl renewal course 11/7/09
sent in paperwork 11/12/09
received new chl 12/09/09
NRA member
Glock 22
Bushmaster Texas Carbine (XM15-E2S)
sent in paperwork 11/12/09
received new chl 12/09/09
NRA member
Glock 22
Bushmaster Texas Carbine (XM15-E2S)
-
- Senior Member
- Posts in topic: 2
- Posts: 26851
- Joined: Wed Jan 16, 2008 12:59 pm
- Location: North Richland Hills, Texas
- Contact:
Re: Am I the only one who prefers mil-spec AR mags?
That's exactly my reasoning. I can't always afford the "go big or go home" thing, but sometimes success or failure boil down to the small details - like high quality magazines and good optics.dicion wrote:My Rifle is a TEOTWAWKI Rifle. So I got Mags that should last until then, and maybe afterwords. Pmags
“Hard times create strong men. Strong men create good times. Good times create weak men. And, weak men create hard times.”
― G. Michael Hopf, "Those Who Remain"
#TINVOWOOT
― G. Michael Hopf, "Those Who Remain"
#TINVOWOOT
-
- Junior Member
- Posts in topic: 2
- Posts: 35
- Joined: Sat May 01, 2010 10:51 pm
- Location: Spring, TX
Re: Am I the only one who prefers mil-spec AR mags?
I think that you spent a few hundred too much on the handgun, my HK's and a pump action shotgun (in addition to the AR's) will do me just finedicion wrote:My Rifle is a TEOTWAWKI Rifle. So I got Mags that should last until then, and maybe afterwords. Pmags
Also, I have this really annoying habit to 'go big or go home' or 'why buy mediocre when you can get the best' attitude towards everything.
My first handgun that I bought myself was a $1200 1911... skipped the entire Revolver/Glock/Other Cheaper handgun and went straight to the best
Dunno why, but that's just how I am. Mediocre doesn't cut it around me, for anything.
Granted, the counter arguement for my arguement would be that you can purchase 3x as many GI mags as pmags, load em up once, use em, and then discard em, because in a real TEOTWAWKI scenario, are you really going to go back and pick up your mags? I guess it depends on how the world was ending... Zombies... probably not. Defending your home after a natural disaster, probably.
Jim
NRA, TSRA, SAF Life Member, PSC Shooting Club
NRA, TSRA, SAF Life Member, PSC Shooting Club
-
- Senior Member
- Posts in topic: 2
- Posts: 5474
- Joined: Wed May 04, 2005 7:47 pm
- Location: Houston
Re: Am I the only one who prefers mil-spec AR mags?
The Annoyed Man wrote:That's exactly my reasoning. I can't always afford the "go big or go home" thing, but sometimes success or failure boil down to the small details - like high quality magazines and good optics.dicion wrote:My Rifle is a TEOTWAWKI Rifle. So I got Mags that should last until then, and maybe afterwords. Pmags
You and your logic.....
:)
Opportunity is missed by most people because it is dressed in overalls and looks like work. - Thomas Edison
-
- Senior Member
- Posts in topic: 1
- Posts: 301
- Joined: Thu Jul 22, 2010 8:41 pm
Re: Am I the only one who prefers mil-spec AR mags?
I've never used a Mil Spec magazine, or any magazine other than a P-mag in my AR, but not because I am opposed to anything else. When I bought my AR, it came with a P-mag. When I bought my AR, I didnt know much about them, so I asked my buddy which magazines were best to buy, and he said the P-mag, so I bought 3 extras. When the gun show rolls back around, I'll probably buy 5 or 10 more. Magazines are like ammo, you just cant have too many. They were $12 at the gun show.
-
- Junior Member
- Posts in topic: 1
- Posts: 40
- Joined: Tue Sep 09, 2008 6:15 am
Re: Am I the only one who prefers mil-spec AR mags?
children,
Pmags ARE mil-spec.
Pmags ARE mil-spec.
Re: Am I the only one who prefers mil-spec AR mags?
Are they really? Or are they just AR15/M16 compatible? Are they actually GI issue? Or is this a "clip vs. magazine" discussion?Bily Lovec wrote:children,
Pmags ARE mil-spec.
This would be interesting to know for sure.
I believe there is safety in numbers..
numbers like: 9, .22, .38, .357, .45, .223, 5.56, 7.62, 6.5, .30-06...
numbers like: 9, .22, .38, .357, .45, .223, 5.56, 7.62, 6.5, .30-06...