Move over LCP, out of my way P3AT, I'm the new kid.

Gun, shooting and equipment discussions unrelated to CHL issues

Moderator: carlson1


Derekhie
Member
Posts in topic: 7
Posts: 160
Joined: Sun Dec 28, 2008 5:50 pm
Location: San Antonio, Texas

Re: Move over LCP, out of my way P3AT, I'm the new kid.

#16

Post by Derekhie »

seamusTX wrote:
Derekhie wrote:It was a failure to feed. Just gave the slide a little push and that was it. So far that was the only time.
What kind of ammo?

That sounds like a typical break-in problem.

- Jim
Yeah, that's what I'm thinking too. I've been using winchester 380 auto 95 gr. It's getting to the point where you have to use what you can find here. Went to bass pro shop yesterday to pick up some ammo and they were sold out of 380. About all they had there was 9mm and 45. They did have 40s&w but only in the value pack of 250 rounds. I did find some 380 at academy later though.
User avatar

seamusTX
Senior Member
Posts in topic: 6
Posts: 13551
Joined: Fri May 12, 2006 12:04 pm
Location: Galveston

Re: Move over LCP, out of my way P3AT, I'm the new kid.

#17

Post by seamusTX »

Is that the Winchester wadcutters?

I have found those to be the best-feeding .380s, in my limited experience. I don't know why. Hollowpoints and Blazers seem to have more problems.

You have to special-order this caliber and pay through the nose. It's as bad as .357 Magnum, which is a lot more fun to shoot, IMO.

- Jim

Derekhie
Member
Posts in topic: 7
Posts: 160
Joined: Sun Dec 28, 2008 5:50 pm
Location: San Antonio, Texas

Re: Move over LCP, out of my way P3AT, I'm the new kid.

#18

Post by Derekhie »

seamusTX wrote:Is that the Winchester wadcutters?

I have found those to be the best-feeding .380s, in my limited experience. I don't know why. Hollowpoints and Blazers seem to have more problems.

You have to special-order this caliber and pay through the nose. It's as bad as .357 Magnum, which is a lot more fun to shoot, IMO.

- Jim
All that I've shot through it so far has been 380 target. I have a couple of boxes of hollowpoints but haven't use any of those yet. I read on another site where the guy said he had a couple of FTF in the first 100 rounds but is at 500 rounds now without any more problems. I guess that will be the same for me too.
User avatar

Keith B
Moderator
Posts in topic: 1
Posts: 18502
Joined: Sat Aug 18, 2007 3:29 pm

Re: Move over LCP, out of my way P3AT, I'm the new kid.

#19

Post by Keith B »

For anyone that is wanting one of these, I was at the Bullet Trap in Plano yesterday and they have some in stock. Just under $500 for price.
Keith
Texas LTC Instructor, Missouri CCW Instructor, NRA Certified Pistol, Rifle, Shotgun Instructor and RSO, NRA Life Member

Psalm 82:3-4
User avatar

anygunanywhere
Senior Member
Posts in topic: 1
Posts: 7874
Joined: Fri Apr 01, 2005 9:16 am
Location: Richmond, Texas

Re: Move over LCP, out of my way P3AT, I'm the new kid.

#20

Post by anygunanywhere »

They must be really good guns for that price.

Anygunanywhere
"When democracy turns to tyranny, the armed citizen still gets to vote." Mike Vanderboegh

"The Smallest Minority on earth is the individual. Those who deny individual rights cannot claim to be defenders of minorities." – Ayn Rand

trvlgnome
Junior Member
Posts in topic: 1
Posts: 32
Joined: Sat Mar 24, 2007 9:09 pm
Location: Central Texas

Re: Move over LCP, out of my way P3AT, I'm the new kid.

#21

Post by trvlgnome »

The problem is with a new design, it takes a while for holster manufacturers to get caught up. If they decide to mass produce for a particular pistol at all. You notice even on the web site that a factory holster was "coming soon".
I'd love to shoot one but I'll stick with the P3AT and my multiple holsters (ankle, hip and pocket. yes, I use them all) for now.
NRA
Kimber ultra CDP
Keltec P3AT

KD5NRH
Senior Member
Posts in topic: 3
Posts: 3119
Joined: Sat Mar 04, 2006 3:25 am
Location: Stephenville TX

Re: Move over LCP, out of my way P3AT, I'm the new kid.

#22

Post by KD5NRH »

anygunanywhere wrote:They must be really good guns for that price.
If you want a really great gun, I've got a PT-99 I'll let go of for only $14,999.

:mrgreen:

Derekhie
Member
Posts in topic: 7
Posts: 160
Joined: Sun Dec 28, 2008 5:50 pm
Location: San Antonio, Texas

Re: Move over LCP, out of my way P3AT, I'm the new kid.

#23

Post by Derekhie »

trvlgnome wrote:The problem is with a new design, it takes a while for holster manufacturers to get caught up. If they decide to mass produce for a particular pistol at all. You notice even on the web site that a factory holster was "coming soon".
I'd love to shoot one but I'll stick with the P3AT and my multiple holsters (ankle, hip and pocket. yes, I use them all) for now.
I bought a De Santis pocket holster that was marked for a LCP for my Micro Desert Eagle. It fits perfect. The size of the Micro Desert Eagle and the LCP are very close.

TexasVet
Senior Member
Posts in topic: 1
Posts: 342
Joined: Fri Aug 01, 2008 1:42 pm

Re: Move over LCP, out of my way P3AT, I'm the new kid.

#24

Post by TexasVet »

HankB wrote:Here's a pocket pistol design that really looks interesting . . . if it ever goes into production.

http://bobergengineering.com/" onclick="window.open(this.href);return false;
That does look pretty cool, especially the micro. Does not look light, but hopefully would not beat your hand up too bad.
User avatar

PUCKER
Senior Member
Posts in topic: 1
Posts: 1563
Joined: Wed Jan 30, 2008 4:05 pm
Location: Grapevine, TX

Re: Move over LCP, out of my way P3AT, I'm the new kid.

#25

Post by PUCKER »

I'm pretty interested in this gun. I was at a job shop show last week and the shop that makes parts for Magnum Research was exhibiting there. They had quite a few samples out, saw lots of parts both internal/external, for the Micro, the BFR, Desert Eagle, etc. The shop is located in MN - and they manufacture a large chunk of the parts for these guns. I was impressed with the manufacturing. As luck would have it, they had a Magnum research brochure (full line). I ran across a few of the Micros at the Ft. Worth Gun Show last weekend, pricing was $499-535 from what I recall.

Derekhie
Member
Posts in topic: 7
Posts: 160
Joined: Sun Dec 28, 2008 5:50 pm
Location: San Antonio, Texas

Re: Move over LCP, out of my way P3AT, I'm the new kid.

#26

Post by Derekhie »

Still lovin mine. :fire
User avatar

Liberty
Senior Member
Posts in topic: 2
Posts: 6343
Joined: Mon Jul 03, 2006 8:49 pm
Location: Galveston
Contact:

Re: Move over LCP, out of my way P3AT, I'm the new kid.

#27

Post by Liberty »

They claim it is "The world's most powerful 9mm pocket-sized pistol. " What makes one 9mm more powerful than another?
Liberty''s Blog
"Today, we need a nation of Minutemen, citizens who are not only prepared to take arms, but citizens who regard the preservation of freedom as the basic purpose of their daily life and who are willing to consciously work and sacrifice for that freedom." John F. Kennedy
User avatar

seamusTX
Senior Member
Posts in topic: 6
Posts: 13551
Joined: Fri May 12, 2006 12:04 pm
Location: Galveston

Re: Move over LCP, out of my way P3AT, I'm the new kid.

#28

Post by seamusTX »

I'm confused. This thread is about the Micro Desert Eagle .380 ACP (granted, .380 is the same diameter as 9 mm).

Any particular pistol in a certain caliber can be more powerful than another due to the action (locked breech versus blowback) and barrel length.

- Jim
User avatar

Liberty
Senior Member
Posts in topic: 2
Posts: 6343
Joined: Mon Jul 03, 2006 8:49 pm
Location: Galveston
Contact:

Re: Move over LCP, out of my way P3AT, I'm the new kid.

#29

Post by Liberty »

seamusTX wrote:I'm confused. This thread is about the Micro Desert Eagle .380 ACP (granted, .380 is the same diameter as 9 mm).

Any particular pistol in a certain caliber can be more powerful than another due to the action (locked breech versus blowback) and barrel length.

- Jim
Not as confused as I . It is what I get for jumping into a resurrected thread, I was thinking the thread was about this gun.
http://bobergengineering.com" onclick="window.open(this.href);return false;
Sorry bout that !!
Liberty''s Blog
"Today, we need a nation of Minutemen, citizens who are not only prepared to take arms, but citizens who regard the preservation of freedom as the basic purpose of their daily life and who are willing to consciously work and sacrifice for that freedom." John F. Kennedy

Rex B
Senior Member
Posts in topic: 1
Posts: 3615
Joined: Thu Jul 06, 2006 3:30 pm
Location: DFW

Re: Move over LCP, out of my way P3AT, I'm the new kid.

#30

Post by Rex B »

You know, I like .380s.

At last count I have about 14 of them, including a P3T and and LCP.

Figured I'd have to have that Kahr when it came out.

But then I bought a Colt Mustang Pocketlite a couple months ago, and liked it best of all.
It's accurate, has real sights, and it doesn't hurt my hand.
In fact i have another one coming this week.
Then Sig announced the P238 at theSHOT show. It's a Sig-ized Mustang for the 21st century.
And it's about the same price as that Kahr.

So I'll have to have that next month.
I think my tupperware days are numbered.
-----------
“Sometimes there is no alternative to uncertainty except to await the arrival of more and better data.” C. Wunsch
Post Reply

Return to “General Gun, Shooting & Equipment Discussion”