Pictures Of Your Daily Carry

Gun, shooting and equipment discussions unrelated to CHL issues

Moderator: carlson1


RetiredE9
Junior Member
Posts in topic: 1
Posts: 29
Joined: Sun Sep 23, 2007 10:37 am
Location: Plano

#346

Post by RetiredE9 »

I'm new to this board so I thought I would jump in with my main carry and household back-ups.

First, I put the 1911 in there because so many of you seem to have an affinity for the 1911s, I certainly do, my father taught me how to shoot a handgun with that ugly brute. I still have a scar on the web of my right had when that hammer caught me. That's a lesson that's stayed with me for life!

It’s a true 1911, 5 digit serial number made in 1913. My father started out in the Arkansas National Guard and this was the side arm he was given when he was commissioned. When the ANG was federalized he took it into the army with him and carried it throughout WWII as an infantry officer in the Pacific.

When he was demobilized he just kept it since no one asked for it; so now, it’s mine.

My main carry is the Kahr CW-40. I just carry one mag with the first three rounds of Glaser Safety Slugs. I became familiar with them in the early 70’s when the USAF began putting cops on planes when the Sky Marshal program was starting up. Then In 1988-89, I conducted a murder investigation in which the victim, a U.S.A.F. NCO, was shot in the right chest at a relatively close range, 8 feet, with one of these rounds. The projectile completely fragmented and dispersed inside the body with little outward sign of trauma, except the entry wound. The victim bled less than a cup of blood and death was almost instantaneous, rare for a thoracic wound. Without several detailed X-rays taken during the autopsy, it was impossible to determine what had killed him since there was no big radiological "shadow" of a normal round. On the X-ray it looked like his chest was full of small metal shavings, something not normally considered fatal.

The two wheelies are a blued S&W Mdl 36, .38 special and a stainless Tarus. I taught my wife to shoot with the S&W and she can still hit center mass at 15 feet; the only measure of marksmanship that I care about.

A question. I use a Kangaroo holster for maximum concealment under my shirt under my left armpit. I’ll never set any quick draw records but it’s damn hard to see. Anyone else use that holster?

Glad I found this board. I plan to be a frequent visitor





Image
I'd rather be lucky than good

RKirby
Senior Member
Posts in topic: 4
Posts: 352
Joined: Tue Jul 04, 2006 2:58 pm

#347

Post by RKirby »

ReiredE9...

Welcome to the forum and nice collection!

If only that 1911 could talk........
"Superior firepower is an invaluable tool when entering into negotiations." - G. Patton

73Driver
Junior Member
Posts in topic: 1
Posts: 7
Joined: Sun Sep 23, 2007 8:14 pm
Location: North of Houston

New to the forum

#348

Post by 73Driver »

I am new to the forum and CHL just having obtained my CHL in July. While this is all my guns the Colt Commander is my carry weapon. I don't have a picture of of my hoslter, but wanted to say hello and introduce myself.

Image
Blind dumb luck beats skill and cunning two out of three times.

htxred
Senior Member
Posts in topic: 9
Posts: 461
Joined: Thu Aug 09, 2007 9:31 am

#349

Post by htxred »

nice 1911s. i like your what looks like dan wesson as well, i have 2, CBOB im 10mm and .45

good to know plenty of others carry 1911s. im probably one of the few young bucks here in houston that carry a 1911.
User avatar

RubenZ
Member
Posts in topic: 4
Posts: 197
Joined: Fri Jul 06, 2007 9:05 am
Location: Rio Grande Valley
Contact:

#350

Post by RubenZ »

Updated pic. Now that I got a Holster.


This is my Every Day Carry setup when I'm not at work. I work at a University :( no guns.

Image

Texas Armadillo
Member
Posts in topic: 5
Posts: 61
Joined: Thu Jun 21, 2007 7:25 am
Location: Katy, Texas

#351

Post by Texas Armadillo »

Diode wrote:
age_ranger wrote:Nicely done, Wildscar! Not everyone commits to carrying a full size!

Texas Armadillo obviously knows where to go for the right holster!!! Nice!!
My lil' Brother has way too many guns. I need to go borrow a few of them.

Sheesh, Nice Setup's TA!!!!!!! VERY nice.
Blasphemy! One can never have too many guns! Yes, you need to come borrow some, and we can go shooting too. Been too long.

TA

KinnyLee
Senior Member
Posts in topic: 11
Posts: 1295
Joined: Thu Sep 29, 2005 12:59 pm
Contact:

#352

Post by KinnyLee »

Daily carry.

It's mostly stock with a few minor touches.

GI plug and shorty guide rod
Wolff 16# spring to replace the stock 14#
Ed Brown plunger tube
Ed Brown grip screw bushings
Wolff plunger spring
Ed Brown safety and slidestop plunger

I think that's it.

Holster is Comp-Tac CTAC with twin mag holders
Mags are stock 7 rd metalforms from SA.

Knives are Sog Trident, and Coldsteel Recon 1

Backup - G19

Image
Image

killerquad
Member
Posts in topic: 1
Posts: 194
Joined: Sat Aug 19, 2006 1:14 am
Location: Frisco TX
Contact:

#353

Post by killerquad »

Some of my toys.

Image
Image
Image
Image
"The belief in a supernatural source of evil is not necessary; men alone are quite capable of every wickedness."

Wheelman
Junior Member
Posts in topic: 2
Posts: 24
Joined: Tue Feb 13, 2007 11:14 am
Location: Houston, Texas

#354

Post by Wheelman »

NcongruNt wrote:Ok, got some updated pictures of my carry rig. I'll be updating to my Hi-Power as soon as I get the chance to test it out, but here's the PA-63 and the rest of my daily carry stuff for now.

Image

FEG PA-63
Bianchi Professional IWB holster
Hornady XTP 95gr. in 9x18 Makarov
2 extra mags
Spyderco Native III
First Defense MK-8 OC .18% .58oz.
Motorola SLVR Cell Phone
I need a holster for my PA-63. Also, i need a gunsmith for my pa-63. :roll: Is that the one for the PPK, or for the Makarov you have there, and how does it fit?
Springfield XD-9 9mm
FEG PA-63 9x18mm
RRA Elite CAR AR-15 5.56mm
Remington 870 Express 12ga.
Marlin Mdl 60 .22
Winchester Mdl 70 Featherweight .30-06

NcongruNt
Senior Member
Posts in topic: 19
Posts: 2416
Joined: Sun Feb 25, 2007 12:44 am
Location: Austin, Texas

#355

Post by NcongruNt »

Wheelman wrote: I need a holster for my PA-63. Also, i need a gunsmith for my pa-63. :roll: Is that the one for the PPK, or for the Makarov you have there, and how does it fit?
That's the model fitted for the PPK, as the PA-63 is a direct copy of the PPK. Bianchi 100 (Professional), size 09, part number 19226(RH)/19227(LH). I have no complaints, and it works well for me. The clip is nice and stiff and really hangs on. I prefer carrying OWB, but when IWB is needed, this does the trick. I hear a lot of good things about the Comp-Tac Infadel, and it looks like they're making it for the PPK now. I'll probably pick one up in the near future, as I don't have a tuckable option for either of my pistols right now.

What's the problem with your PA-63?

Wheelman
Junior Member
Posts in topic: 2
Posts: 24
Joined: Tue Feb 13, 2007 11:14 am
Location: Houston, Texas

#356

Post by Wheelman »

I can't get it to reliably go bang when I pull the trigger with any of the aftermarket springs I've tried. It works with the factory spring, but the trigger pull with that is about 2,000 pounds.
Springfield XD-9 9mm
FEG PA-63 9x18mm
RRA Elite CAR AR-15 5.56mm
Remington 870 Express 12ga.
Marlin Mdl 60 .22
Winchester Mdl 70 Featherweight .30-06

NcongruNt
Senior Member
Posts in topic: 19
Posts: 2416
Joined: Sun Feb 25, 2007 12:44 am
Location: Austin, Texas

#357

Post by NcongruNt »

Wheelman wrote:I can't get it to reliably go bang when I pull the trigger with any of the aftermarket springs I've tried. It works with the factory spring, but the trigger pull with that is about 2,000 pounds.
Ah. That is a common complaint. I've heard it measured anywhere from 18 to 25 lbs. I simply practiced with it until I could place a DA shot fairly accurately. It's subjective to the shooter, and some people simply don't have the hand strength to pull it off. About half the people I take shooting can't pull the DA trigger while aiming. I don't have a technical recommendation, but you may be able to acclimate yourself to it with practice. You might be able to take a little off by having a gunsmith do so polishing or changing out springs until you get something a little lighter that still works reliably, but the cost of the work may exceed the value of the gun.

Snake Doctor
Senior Member
Posts in topic: 10
Posts: 209
Joined: Fri Sep 21, 2007 4:47 pm
Location: Austin

#358

Post by Snake Doctor »

NcongruNt wrote:
Wheelman wrote:I can't get it to reliably go bang when I pull the trigger with any of the aftermarket springs I've tried. It works with the factory spring, but the trigger pull with that is about 2,000 pounds.
Ah. That is a common complaint. I've heard it measured anywhere from 18 to 25 lbs. I simply practiced with it until I could place a DA shot fairly accurately. It's subjective to the shooter, and some people simply don't have the hand strength to pull it off. About half the people I take shooting can't pull the DA trigger while aiming. I don't have a technical recommendation, but you may be able to acclimate yourself to it with practice. You might be able to take a little off by having a gunsmith do so polishing or changing out springs until you get something a little lighter that still works reliably, but the cost of the work may exceed the value of the gun.
Switch to PMs, fellas. This is a picture thread.
Nemo me impune lacessit.

Dave01
Member
Posts in topic: 1
Posts: 130
Joined: Sat Oct 27, 2007 4:06 pm
Location: Rockwall, TX

#359

Post by Dave01 »

Springfield Loaded Micro-Compact Lightweight 1911, .45 ACP

I've only put about 100 round through it so far but I've only had it for a week (special thanks to Bill and Rey for the great time at the range). I'm very pleased with it so far. It fits my hand well for such a small pistol and has a lot less recoil than I anticipated.

Image

Glock 23
Senior Member
Posts in topic: 5
Posts: 294
Joined: Fri Oct 26, 2007 3:34 am

#360

Post by Glock 23 »

this thread just keeps getting better and better
Post Reply

Return to “General Gun, Shooting & Equipment Discussion”