9mm subguns and the power of marketing

Gun, shooting and equipment discussions unrelated to CHL issues

Moderator: carlson1

Which 9mm subgun is best

Sig MPX
4
11%
CZ Evo
9
26%
MP5 Clone
2
6%
Kriss Vector
2
6%
None: Save your money
18
51%
 
Total votes: 35


CC Italian
Senior Member
Posts in topic: 1
Posts: 1209
Joined: Mon Apr 21, 2008 11:58 pm

Re: 9mm subguns and the power of marketing

#16

Post by CC Italian »

Sub in 9mm would be fun but if I where going for a pistol caliber carbine I think I would go for one of these after shooting it. I would want a pistol caliber with a little more thump! https://www.youtube.com/watch?v=wfVPEQfmHEA

mrvmax
Senior Member
Posts in topic: 1
Posts: 2023
Joined: Tue Oct 25, 2005 7:16 pm
Location: Friendswood

Re: 9mm subguns and the power of marketing

#17

Post by mrvmax »

I have a 300 Blackout AR platform pistol which is a great firearm and I also built an AR platform 9mm rifle that uses Glock magazines and that also has serves its purpose. At this point I am waiting for New Frontier Armory to come out with 10mm a Glock mag lowers so I can have a 10mm rifle that will use the same mags as my carry gun (Glock 29). I think 10mm will be a great compromise and with a 16" barrel I should get some extra velocity along with a .40 cal Bullet.

2farnorth
Senior Member
Posts in topic: 1
Posts: 794
Joined: Wed Feb 09, 2011 5:35 pm
Location: White Hall, Ar

Re: 9mm subguns and the power of marketing

#18

Post by 2farnorth »

I tried out an MP5 suppressed for a former employer. Did not care that much for it. Seemed to blow smoke right back in my face and eyes. After a couple of mags I had to put it down and said no thanks. We already had some old S&W M76s to lug around that I felt were unnecessary for our duty. Boss couldn't understand why I would rather use a shotgun or one of the AR15s instead of a " sub machine gun".
All those others on the list are unknowns for me, so I didn't vote.

Now if you had the old American Arms 180 on the list I would have voted. That was a fun shooter. Only problem was it took too long to reload the drum with 177 22LR. At 1200 rpm to sounded more like a loud zipper. Was it practical??? Probably not. It was unique.
N5PNZ

maverick2076
Senior Member
Posts in topic: 2
Posts: 585
Joined: Wed Feb 27, 2008 11:16 am

Re: 9mm subguns and the power of marketing

#19

Post by maverick2076 »

mrvmax wrote:I have a 300 Blackout AR platform pistol which is a great firearm and I also built an AR platform 9mm rifle that uses Glock magazines and that also has serves its purpose. At this point I am waiting for New Frontier Armory to come out with 10mm a Glock mag lowers so I can have a 10mm rifle that will use the same mags as my carry gun (Glock 29). I think 10mm will be a great compromise and with a 16" barrel I should get some extra velocity along with a .40 cal Bullet.

Quarter Circle 10 makes a lower for .45 or 10mm Glock mags
User avatar

E.Marquez
Senior Member
Posts in topic: 1
Posts: 2781
Joined: Sat Feb 20, 2010 11:48 pm
Location: Kempner
Contact:

Re: 9mm subguns and the power of marketing

#20

Post by E.Marquez »

The Annoyed Man wrote:Oh for sure, it will weigh more. That sig is a nifty little gun. Heck, the 220 grain .308 bullets alone will weigh more than an entire 9mm cartridge. But I'm going to build my SBR as light as I can. It will sit on the same Spikes Gen II billet lower you already fired at our range day a few weeks ago. The Spikes Gen II Billet receiver halves together are really light (1.65 lbs combined). I'm using a Minimalist stock (5.8 oz), and the barrel I'm going to use weighs 1 lb 6 oz. The entire package is going to weigh 5.8 lb when it is finished — unloaded with optic and mount included.

I'm not to worried about weight. :mrgreen:
Would you be so kind as to send me the build sheet for this gun........You did an outstanding job the last time making gathering parts a breeze. :biggrinjester:
Companion animal Microchips, quality name brand chips, lifetime registration, Low cost just $10~12, not for profit, most locations we can come to you. We cover eight counties McLennan, Hill, Bell, Coryell, Falls, Bosque, Limestone, Lampasas
Contact we.chip.pets@gmail.com
User avatar

Scott B.
Senior Member
Posts in topic: 4
Posts: 1457
Joined: Tue Aug 05, 2014 11:46 am
Location: Harris County

Re: 9mm subguns and the power of marketing

#21

Post by Scott B. »

I succumbed, and ordered a CZ EVO Scorpion Carbine. It's at customs along with all the others waiting to enter the country.

Future SBR.
LTC / SSC Instructor. NRA - Instructor, CRSO, Life Member.
Sig pistol/rifle & Glock armorer | FFL 07/02 SOT
User avatar

The Annoyed Man
Senior Member
Posts in topic: 4
Posts: 26850
Joined: Wed Jan 16, 2008 12:59 pm
Location: North Richland Hills, Texas
Contact:

Re: 9mm subguns and the power of marketing

#22

Post by The Annoyed Man »

E.Marquez wrote:
The Annoyed Man wrote:Oh for sure, it will weigh more. That sig is a nifty little gun. Heck, the 220 grain .308 bullets alone will weigh more than an entire 9mm cartridge. But I'm going to build my SBR as light as I can. It will sit on the same Spikes Gen II billet lower you already fired at our range day a few weeks ago. The Spikes Gen II Billet receiver halves together are really light (1.65 lbs combined). I'm using a Minimalist stock (5.8 oz), and the barrel I'm going to use weighs 1 lb 6 oz. The entire package is going to weigh 5.8 lb when it is finished — unloaded with optic and mount included.

I'm not to worried about weight. :mrgreen:
Would you be so kind as to send me the build sheet for this gun........You did an outstanding job the last time making gathering parts a breeze. :biggrinjester:
Sent you a PM.
“Hard times create strong men. Strong men create good times. Good times create weak men. And, weak men create hard times.”

― G. Michael Hopf, "Those Who Remain"

#TINVOWOOT

locke_n_load
Senior Member
Posts in topic: 2
Posts: 1000
Joined: Tue Apr 09, 2013 3:35 pm

Re: 9mm subguns and the power of marketing

#23

Post by locke_n_load »

I would vote for the Evo or build your own 9mm.

I have an SBR in 300 BLK with can, and am building a 3.5" 9mm AR (glock mags) and have a 9mm suppressor as well (total barrel length, suppressed = 11").

In the long run, I wish I had skipped the 300 build and went straight to 9mm. The 300 BLK 8" barrel + 7" suppressor is just about as long as a normal AR15, and I can't afford to feed my 300 BLK at $1 a round (even reloading this round is expensive). Yes, the 300 BLK is better than 9mm as far as energy goes, especially at a distance, but I can buy and practice much more at $.25 a round for 9mm hollowpoint subsonics from freedom munitions, and I won't leave the range knowing I spent a fortune shooting that day. I would suspect that good 9mm HP subs (not freedom munitions) would do decent out to a certain point, but I am building that gun for Home Defense anyway - 50 yards max.
CHL Holder since 10/08
NRA Certified Instructor
Former LTC Instructor

locke_n_load
Senior Member
Posts in topic: 2
Posts: 1000
Joined: Tue Apr 09, 2013 3:35 pm

Re: 9mm subguns and the power of marketing

#24

Post by locke_n_load »

Scott B. wrote:Price is what's doing it for me as the EVO is half the MPX, even though that MPX sure is slick. MPX with the rear charging handle is a little gassier than the EVO and I intend to run it suppressed.

Of note, CZ has two carbine options for the EVO out this year. One with a standard flash hider (CZ 08505), the other with a faux suppressor (CZ 08507) from Silencer Co and is supposedly ready to go for SBR conversion, no 992r kit required. I'm curious if the fake can is pinned or what?

Now, if you're on the fence, I can't help you. But, you should know that NRA Certified Instructors do qualify for both the Sig Sauer and the CZ First Responder discounts.... :thumbs2:
How much are the discounts kind sir??
CHL Holder since 10/08
NRA Certified Instructor
Former LTC Instructor
User avatar

Scott B.
Senior Member
Posts in topic: 4
Posts: 1457
Joined: Tue Aug 05, 2014 11:46 am
Location: Harris County

Re: 9mm subguns and the power of marketing

#25

Post by Scott B. »

PM Sent.
LTC / SSC Instructor. NRA - Instructor, CRSO, Life Member.
Sig pistol/rifle & Glock armorer | FFL 07/02 SOT

SigM4
Senior Member
Posts in topic: 1
Posts: 861
Joined: Tue Jun 12, 2007 11:14 am
Location: Wichita, KS…for now (always a Texan)

Re: 9mm subguns and the power of marketing

#26

Post by SigM4 »

Scott B. wrote:I succumbed, and ordered a CZ EVO Scorpion Carbine. It's at customs along with all the others waiting to enter the country.

Future SBR.
Where did you find these for sale already?
Success always occurs in private, and failure in full view.
User avatar

Bitter Clinger
Banned
Posts in topic: 4
Posts: 2593
Joined: Mon Jul 28, 2014 5:16 pm
Location: North Dallas

Re: 9mm subguns and the power of marketing

#27

Post by Bitter Clinger »

locke_n_load wrote:I would vote for the Evo or build your own 9mm.

I have an SBR in 300 BLK with can, and am building a 3.5" 9mm AR (glock mags) and have a 9mm suppressor as well (total barrel length, suppressed = 11").

In the long run, I wish I had skipped the 300 build and went straight to 9mm. The 300 BLK 8" barrel + 7" suppressor is just about as long as a normal AR15, and I can't afford to feed my 300 BLK at $1 a round (even reloading this round is expensive). Yes, the 300 BLK is better than 9mm as far as energy goes, especially at a distance, but I can buy and practice much more at $.25 a round for 9mm hollowpoint subsonics from freedom munitions, and I won't leave the range knowing I spent a fortune shooting that day. I would suspect that good 9mm HP subs (not freedom munitions) would do decent out to a certain point, but I am building that gun for Home Defense anyway - 50 yards max.

Can ring steel all day long at 100 yards with my 9mm MPX and I'm reasonably confident it would remain effective out to at least 150. After that energy would likely dramatically dissipate and trajectory path would become pretty steep.
"You may all go to H3ll, and I will go to Texas." - Davy Crockett
"Fast is fine, but accuracy is everything." - Wyatt Earp
NRA Life Member
לעולם לא תשכח
User avatar

Scott B.
Senior Member
Posts in topic: 4
Posts: 1457
Joined: Tue Aug 05, 2014 11:46 am
Location: Harris County

Re: 9mm subguns and the power of marketing

#28

Post by Scott B. »

SigM4 wrote:
Scott B. wrote:I succumbed, and ordered a CZ EVO Scorpion Carbine. It's at customs along with all the others waiting to enter the country.

Future SBR.
Where did you find these for sale already?

Unfair advantage of being an FFL. Had our supplier put one on allocation for me.
LTC / SSC Instructor. NRA - Instructor, CRSO, Life Member.
Sig pistol/rifle & Glock armorer | FFL 07/02 SOT
Post Reply

Return to “General Gun, Shooting & Equipment Discussion”