TexasCHLforum.com

The Annoyed Man wrote:

Liberty wrote:I have the 18" Stainless GSR, with a x 2.5 Leopold that is forward mounted on see-thru mounts. I had to add a cheekpad to allow a good cheekweld while using the scope. I also replaced the flash hider with the thread protector.

The stainless 18” version wasn’t available when I bought mine, or I might well have bought that instead. I don’t feel like an extra 2” of barrel would be that much more noticeably cumbersome. One note..... I found out the hard way that there is truth to a certain rumor I had heard about the barrel threading on the Gunsite Scouts not being concentric to the bore.

I like Ruger stainless, I probably would have got it in 16" if it was available at the time. Taking off the hider was my way of compensating for the extra 2 inches. I think it looks better and is just less likely to catch on stuff. Jeff Cooper's concept of a scout was someone on foot or horseback. My 21st century concept is being on foot or inside my Honda where every inch counts for maneuvering.

Someday if the government decides that our hearing is worth saving I would love to have a suppressed gun. I wouldn't suppress the GSR though. I would want a 300 BO AR style or a 22lR bolt or lever suppressed. I value the GSR compactness and power of the .308 more than my hearing.

The Annoyed Man wrote:
My scope is lower to the barrel than yours, so an elevated cheek rest isn’t necessary. It looks like you’re using “look through” rings? I solved it by using quick-release Burris XTR tactical rings. The scope sits lower to the bore, and if it needs to be removed for any reason, popping two levers open gets it off the rail quickly, and bingo - iron sights. If remounted, it’s not going to return to perfect zero, but it will be close enough for quick and dirty, and can be adjusted on the fly fairly quickly with that milling reticle and matching .1 mil clicks on the turrets.

In Hindsight I should have used a good set of quick releases. One thing I have learned is if you sight it in at 25 Yards you're pretty much good to go out to 300 yards. Sighting / resighting in a .308 is pretty easy and can be done with a half box of ammo. The thing is, I only have access to a 100 yard range so I don't have a lot of motivation to lower the scope at this time but it is something I probably will change sooner or later. I do think that sling might be a better investment to my shooting skills though.

Liberty wrote: What is that sling you have on that GSR?

The Annoyed Man wrote:It’s a Galco Safari “Ching Sling” - the type of sling recommended by Col Cooper himself for scout type rifles: https://www.galcogunleather.com/safari- ... _1257.html


I love mine. The leather is still a little bit stiff because I haven’t actually used the sling very much in the field to carry and deploy the rifle, so it’s not fully broken in yet, but like most Galco products, it is exceptionally well made, and in my opinion, certainly worth the $80 they charge for it. I expect it to last as long as the rifle does. I have several other slings, mostly VTAC slings for my ARs, but this leather Ching sling is by far the nicest sling I have. If Ling New at Gunsite Academy says it works, then it works. I will tell you that you’ll spend a little time figuring out what adjustment settings work for you at your individual size. And because the brass studs and corresponding holes in the leather are meant to be left alone once your fit has been figured out, it’s a little bit of work to make those adjustments. But it does work exactly as advertised, and it makes for very stable shooting when away from the bench.

Thanks, I've been wondering about a 2 point Ching Sling, and if it was much of a compromise from the 3 point sling. It looks like the two point that you are using will work well for me.

I have the 18" Stainless GSR, with a x 2.5 Leopold that is forward mounted on see-thru mounts. I had to add a cheekpad to allow a good cheekweld while using the scope. I also replaced the flash hider with the thread protector.

The Annoyed Man wrote:Ruger Gunsite Scout (technically, dark gray, but it IS a wooden stock):

What is that sling you have on that GSR?